IP plumbing questions - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• IP plumbing questions by Gizmoman on 08 Jun, 2013 12:15
• Here's a snapshot of my whammer-jammer Giles pump.
  
  
  Can anyone tell me if I have the ports labeled correctly?
  
  On the FUEL OUT port (if correct), there is a dual banjo fitting. I am assuming that the smaller barb goes to one of the small barbs on #1 injector. The larger barb goes back to tank.
  
  Also, the barb on top of the LDA (I think that's what it is) - is boost from the turbo. This would be a hose "T'd" from the line going to my DIY boost controller which opens the waste-gate - correct?
  
  Let me know If I have labeled this incorrectly.
  
  Thanks.
  
  Jim
• #1 by libbydiesel on 08 Jun, 2013 12:21
• Yes.
• #2 by Gizmoman on 08 Jun, 2013 12:43
• Quote from: Gizmoman on 08 Jun, 2013 12:15

  Let me know If I have labeled this incorrectly.
  
  Thanks.
  
  Jim
  

  
  

  Quote from: libbydiesel on 08 Jun, 2013 12:21

  Yes.
  

  
  Yes, incorrect or Yes, correct? hahah
• #3 by CRSMP5 on 08 Jun, 2013 13:12
• 
  
  you driving.. me nevogating...
  
  me.. up here turn left...
  you... i wanna turn left, right?
  me.... right....
  you... turn right................................................................
  
  
  dont overcomplicate...
• #4 by libbydiesel on 08 Jun, 2013 13:44
• The only question you asked was, "can anyone tell me?"  Yes, someone can tell you.  
  
  You have it labelled correctly.  
• #5 by Gizmoman on 08 Jun, 2013 14:00
• I really try hard to explain myself clearly and the harder I try, the muddier it gets
  
  Who's on first?
  
  Thanks for the "correct" answer.