Yeah, yeah. I know. Join the club.
I'm not handy with fabrication, and don't feel like buying one from TT.
Looking for a cast iron downpipe (hot side to toilet bowl) for a MK1. The part number (if it's still legible) will begin with "171", rather than "191".
Let me know!
I figure my best bet is Canada (more MK1 TDs up there eh?). But will buy from whomever. I'd even take two if you had them.
if you can find a mk3 downpipe it's an easy mod to make it fit a mk1, just cut it on the outlet side of the flex section and from there it's just one 90 deg bend. super easy to do. I have one in my garage for a K03 pictured below. The top is off a 97 TD jetta and the bottom half is a stock mk1 TD pipe that I cut the toilet bowl off. I'd get a 2" diameter 90 mandrel and weld it to one of those if you can find one. I'm out of sqaure flange Mk3 pipes right now.
I'm with him. Running a mk 3 pipe in my mk 2. Came off a k14, will bolt to your t3 or k24. Probably have to cut it like he says...
I'm with him. Running a mk 3 pipe in my mk 2. Came off a k14, will bolt to your t3 or k24. Probably have to cut it like he says...
to fit a mk3 downpipe in a mk1, yea, its gonna have to be chopped up..