-
WTB TD Block
by
jaysen71581
on 14 Feb, 2011 07:23
-
Just as it says i need a new block since mine is cracked, pref a 1.6td block, i have all the other goodies....
-
#1
by
theman53
on 14 Feb, 2011 07:45
-
I looked at your profile all it says is hagerstown. Where is that. I may have something for you.
-
#2
by
jaysen71581
on 14 Feb, 2011 09:37
-
Hagerstown Md, 21740, its in western md..
-
#3
by
jaysen71581
on 14 Feb, 2011 13:10
-
Have money will buy.... Anyone???
-
#4
by
theman53
on 14 Feb, 2011 15:05
-
I have a 1.9l with no head needing reman
I also have a 1.6l no head and mechanical block needing redone. I am in central ohio - holmes county area if you like to drive let me know.
-
#5
by
jaysen71581
on 14 Feb, 2011 15:24
-
Hmmm. Its a turbo block though right?
-
#6
by
theman53
on 14 Feb, 2011 15:26
-
I am under the impression that all the 1.9L had oil squirters. I have no clue what the 1.9 block was or how they came since it is a Canadian thing. It is just the block, crank, pistions. The 1.6 is 100% for sure a TD block. It is just takes the mechanical head instead of the hydro.
-
#7
by
ilikevwdiesel
on 14 Feb, 2011 17:43
-
I have a TD long block from an 84 jetta. 200 plus shipping. pulled it out running but the compression is a little low. I had the head off it and the bores looked pretty good, must need rings. I can box it up and ship it out for you via a freight broker I've been using. email me if you want it: ilikevwdiesel at yahoo dot you know what.
-
#8
by
mainer
on 14 Feb, 2011 18:36
-
still have mine for sale.... u mentioned getting it near boston but havent heard back?
-
#9
by
jaysen71581
on 15 Feb, 2011 18:01
-
Mainer~~~ I got the car in Mass. but i am in MD so id be looking to get it freighted to me, i was tryin to find something local before i try and get one plus shipping, ill keep ya posted and thank you..
-
#10
by
hustonr123
on 16 Feb, 2011 03:53
-
I have a na running motor i had head redone i am 30 min from you pm me for details
-
#11
by
jaysen71581
on 16 Feb, 2011 10:30
-
How much?
-
#12
by
hustonr123
on 16 Feb, 2011 11:09
-
Its a hydro motor 300 i also have 12mm mechanical block na for 100 bucks without head i never heard it run
-
#13
by
jaysen71581
on 16 Feb, 2011 11:12
-
where in PA im off tomorrow i may want to come take alook at both motors..
-
#14
by
hustonr123
on 16 Feb, 2011 11:21
-
i work in marion above greencastle but motors are big cove tannery call me seven 1 seven 496 six 347