T2 turbo... is it possible to make a T2T3? - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• T2 turbo... is it possible to make a T2T3? by X@V on 07 Jan, 2006 19:32
• I bought a Garrett T2 turbo. I also have two T3 turbos.
  
  My question is simple: could I make a T2T3 with the exhaust side of the T2 and the compressor side from the T3?
  
  Will I have to buy a T-25 turbocharger for the compression side?
  
  Thanks
  
  Xav.  
• #1 by QuickTD on 08 Jan, 2006 07:25
• The compressor housing on the T2 is retained by a large snap ring, the T3 uses 6 bolts and retainers, the mounting isn't really compatable. The T2 also has a very small shaft compared to a T3, so the wheel wouldn't fit.
• #2 by X@V on 08 Jan, 2006 08:25
• And the T-25?