advice needed for cylinderhead - Troubleshooting - VWDiesel.net The IDI, TDI, and mTDI source.

• advice needed for cylinderhead by MRDART on 10 Jun, 2009 10:25
• Hi everyone! Just made a serious mistake assembling my d24tic vw/volvo engine
  I managed to turn one of the camshaft holders the wrong way(please don´t make fun of me) so it is now in 2 piesces.
   Can I take one from another head and bolt straight on or do i need to machine it to fit??
  
  Just for info: english is not my first language....
• #1 by LoneWolf on 10 Jun, 2009 10:33
• hi,
      id pressume that you could take the bits you need from another engine like yours, i cant see there being any real problems 
• #2 by the caveman on 10 Jun, 2009 17:03
• You can try another one, but  tighten all the other caps first. Check to make sure the cam turns freely. Then put on the replacement cap, and tighten it down slowly, while checking how the cam turns.
• #3 by MRDART on 10 Jun, 2009 23:13
• Thanks I´ll try that as soon as sourced another head to steal parts from....
  
  What would one do without these forums where you can get all the info you need !!!
• #4 by Rabbit TD on 11 Jun, 2009 15:21
• Quote from: MRDART on 10 Jun, 2009 23:13

  Thanks I´ll try that as soon as sourced another head to steal parts from....
  
  What would one do without these forums where you can get all the info you need !!!
  

  I know what you mean, I think we would eventualy end up giving up our hobby, be forced to buy a new car and be totaly at the dealers mercy and not have eachother to talk to.  That would probably be the saddest part of all
• #5 by MRDART on 12 Jun, 2009 04:17
• I will ask the machinist to fix the problem for me must be cheaper than buying a replacement head anyway