FS: Larger Inetercooler, Excellent Conditon - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• FS: Larger Inetercooler, Excellent Conditon by Familydiesel on 11 Mar, 2009 21:16
• This is an intercooler off of a Volvo.  The core is aluminum, with the side tanks and inlet/outlets plastic.  
  The dimesions are as follows:  
  Bottom width = 23 inches (57 cm)
  Upper width = 29 inches (71cm)
  Height = 17.4 inches (44 cm)
  Depth = 2 inches (5.5 cm)
  Inlet and outlet diameters = 2.5 inches (64mm)
  See picture  :?
  
  http://kpr.craigslist.org/pts/1063603024.html
  
  New Price:  $50 USD + shipping
• #1 by GEE-BEE on 13 Mar, 2009 08:44
• how does it mount ?
  
  I have a MK1 Caddy...
  
  Gee-Bee
  
  [email protected]
• #2 by Familydiesel on 13 Mar, 2009 09:06
• Hi,
  It doesn't have any mounting brackets per se, but has some holes on the bottom support, and has a top rail that could be drilled.  You would have to make the brackets yourself.  
  I also have an MK1 caddy, and the only way I can see to mount this intercooler would be to cut the bottom radiator frame (2 in. X 23in.).  This gives you about 17 inches of height, which is the actual measurement of the intercooler.  I didn't wan to chop up my caddy, so opted to buy one that would be shorter.  
  I want to sell this, but don't want to mislead you.
  Hope this helps,
  Greg
• #3 by GEE-BEE on 13 Mar, 2009 09:15
• I feel the same way, I have a New South African front end on mine and
  new paint
  
  I have a 2.5 DP and having techtonics makeing a 2.5 s/s exhaust system this week
  
  I did the corrado brakes and seats and paid a pretty price for a complete int.
  
  It has 35k original
  
  AAZ with a  5 speed
• #4 by Familydiesel on 13 Mar, 2009 09:28
• Hey cool!
  Sounds like a nice ride.  
  I am putting rear discs on mine from an 85 GTI and have 2 turbo's to experiment with.  I am rebuilding a 1.6td and want to start with a t2 and see how it runs out.  I started with a bad 1.5 na diesel and am looking forward to actually being able to go the speed limit with a little kick.  I have read some threads about making cheep adjustments to the injection pump for more power and plan to experiment with these also.  
  I've got the interior (red) looking nice, and the paint is decent, but the shop that the previos owner used to paint the car, did a horrible job of sanding aroudn the windows, so the front window, door windows and rear window are peeling around the edges.  I want to get a 2.5 " downpipe and exaust also.  
  Fun cars huh?
  Greg
• #5 by GEE-BEE on 13 Mar, 2009 11:38
• SHOOT ME A EMAIL AT [email protected] AND I WILL SHARE SOME PIC'S
• #6 by RabbitJockey on 19 Mar, 2009 14:43
• u should post them here for everyone to admire
• #7 by jtanguay on 19 Mar, 2009 14:48
• 
• #8 by Familydiesel on 21 Mar, 2009 18:58
• Hey jtanguay, thanks for posting the picture.  How did you post the pictures?  I have been trying to do it, but couldn't figure it out, so just posted the url.  
  Thanks again.  
  Greg
• #9 by jtanguay on 21 Mar, 2009 19:21
• Quote from: "Familydiesel"

  Hey jtanguay, thanks for posting the picture.  How did you post the pictures?  I have been trying to do it, but couldn't figure it out, so just posted the url.  
  Thanks again.  
  Greg

  
  
  paste the URL into the post and highlight it and click the Img button.  or you can just put  
  
  to get the URL link you need to right click on the image and then go to properties and copy the address http:// link.
• #10 by Familydiesel on 21 Mar, 2009 19:39
• Thanks a lot.  This really helps.