New Sachs clutch w/install kit, trans, waterpump, Bentley - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• New Sachs clutch w/install kit, trans, waterpump, Bentley by Spulen81 on 09 Feb, 2009 14:48
• New in box 200mm Sachs clutch kit.  Will fit and A1 or A2 with a 200mm clutch.  
  
  SOLD
  
  Comes with:
  -alignment tool
  -thrust plate and retainer clip
  -input and pushrod seal
  -pushrod bushing
  -crank bolts and PP bolts
  -throw out bearing
  
  
  AGS 5 speed, has .75 fifth. From a diesel but ratio wise it would work fine in a gas car. I have to verify the code but I'm pretty sure. $150 pick up only
  
  New Graf waterpump, the good kind. $SOLD,
  
  MK2 Bentley $SOLD
• #1 by Dakotakid on 09 Feb, 2009 20:14
• Are you parting out an '86 car by chance? Are you letting go of the fuel pump?
• #2 by Spulen81 on 10 Feb, 2009 06:44
• I am actually.  Make me an offer on the injection pump I'm not sure what they are worth.  The car was running fine, the PO changed the t-belt and wiped out the valves.  Its only been sitting for a couple months.
• #3 by Dakotakid on 10 Feb, 2009 10:24
• PM'ed ya, I did.
• #4 by GIDDY_UP_GO on 10 Feb, 2009 11:13
• How do you know if you have a 200mm clutch or not? I have an 86 Golf N/A Diesel with a 5 speed.
  
  Also, what shape is the Bentley in?
• #5 by Spulen81 on 10 Feb, 2009 11:31
• You *should* have a 200mm, this kit was for an '86 diesel also.  Unless somebody swapped it out for a 210 at some point.  The Bentley is in good shape.  Its used but not super dirty or worn.  I can email you a pic if you want, just PM me you email address.
• #6 by Spulen81 on 26 Feb, 2009 05:38
• Bentley and waterpump are sold.
• #7 by Spulen81 on 16 Mar, 2009 08:56
• Only the trans is left.  It is an AGS for sure also.