I've put up with this for a while, but thought now was the time to have a go at it. Any suggestions on where to start first? Anybody BTDT ?
Thanks,
-JB
MK1s don't come with intermittent. You need to add it in. If you look at your fuse panel you should see a large metal jumper piece connecting 2 sockets. Remove this and put in a wiper relay from a mk2 and you should have intermittent.
You're good Tyler....very very good. :wink:
Here's my obscure "blast from the past" Rabbit memory... there may also be a plastic wedge on the wiper control stalk that's preventing it from going down into the "intermittent" position.
Ohh I think you are correct as well. Good catch
Nah... just tripped me up once working on my shiny red 1979 Rabbit back in the day. Ah... the memories... :cry:
The LX pick-up had intermittent wipers, I swapped out the relay, IT WORKS!!
Thanks Guys!
-JB
I had that problem for a while untill I got a used relay, then intermittent and high/low worked. But the auto stop only works sometimes :roll: every now and then I have to pop the relay out and smack it on something.