how does this turbo map look? - page 1 - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• how does this turbo map look? by monomer on 11 Nov, 2008 20:54
• For a 1.6td build (turbo bottom end, 8v turbo log mani - 38mm wastegate)
  
  
• #1 by monomer on 12 Nov, 2008 15:07
• none of the turbo guys are gonna chime in?
• #2 by jackbombay on 12 Nov, 2008 15:53
• The pressure ratio is not particularly high, above 3 is what you should be looking for.
  
     Is the X scale cubic meters? Do you have a higher res image of the map?
  
    If you can confirm what the X scale is I can plot a few points on the map for you.
• #3 by monomer on 12 Nov, 2008 17:32
• thats a screendump from a pdf
  
  
  anyone know where to host a pdf?
  
  
  Volumetric Flow m3/min is labeled on the bottom
• #4 by flapjack on 14 Nov, 2008 11:55
• I can host it for you
  email it to
  [email protected]
• #5 by monomer on 14 Nov, 2008 13:04
• sent
• #6 by flapjack on 14 Nov, 2008 13:47
• click for TURBO PDF
  
  and here is a slightly better screenshot of it
  
  
• #7 by monomer on 17 Nov, 2008 18:07
• 
  
  
  any better?
• #8 by monomer on 19 Nov, 2008 15:00
• ^ANYONE?
• #9 by zukgod1 on 19 Nov, 2008 15:05
• Drop jackbombay a PM. He's pretty good with maps.
• #10 by Jet A on 19 Nov, 2008 15:53
• Id run it.
  
  Should have plenty of range for your motor.
• #11 by monomer on 19 Nov, 2008 17:33
• Quote from: "Jet A"

  Id run it.
  
  Should have plenty of range for your motor.

  
  
  
  $300 NEW...
• #12 by blkboostedtruck on 19 Nov, 2008 18:57
• i've ran one but on a gasser! it is a quick spooling turbo!
  but i don't think the turbo's last very long? when i got my truck it had one on it! and it also had 3 trashed core's with it for parts! and even the one that was on it took a dump! so i redone the manifold so it would fit a K26 and i never had a problem since!
  Duane
• #13 by monomer on 20 Nov, 2008 14:03
• Quote from: "blkboostedtruck"

  i've ran one but on a gasser! it is a quick spooling turbo!
  but i don't think the turbo's last very long? when i got my truck it had one on it! and it also had 3 trashed core's with it for parts! and even the one that was on it took a dump! so i redone the manifold so it would fit a K26 and i never had a problem since!
  Duane

  
  
  hmmmmm, my other garrett has lasted 400k miles
  
  
  sounds like you have problems...
• #14 by zukgod1 on 20 Nov, 2008 14:06
• Quote from: "monomer"

  
  sounds like you have problems...

  
  
  That goes without saying!   :lol:  :lol:  :lol: