-
WTB 1.9 td downpipe
by
zozep
on 06 Nov, 2008 13:14
-
I'd like to buy a 1.9 TD DownPipe from a MK3, I have a K24, which one would fit? and does anyone know where I can buy one? or trade?
-
#1
by
burn_your_money
on 06 Nov, 2008 17:14
-
Any mk3 diesel one will work except for the one off a K03. If you get a picture of the downpipe it is obvious if it will work or not. The K03 has a rectangular bolt pattern while every other mk2/3 VW turbo has a square pattern.
-
#2
by
blkboostedtruck
on 06 Nov, 2008 17:16
-
your gonna need to have one made to fit your application!
MK3 did not come with K24's as far as i know?
Duane
-
#3
by
oldskool rich
on 06 Nov, 2008 17:43
-
are you in the UK?
-
#4
by
burn_your_money
on 06 Nov, 2008 18:04
-
He is in Ontario, Canada
A T2 or K14 will work just fine
-
#5
by
RabbitGTDguy
on 06 Nov, 2008 18:52
-
A b3 AAZ one should work just fine. I have one for my b3 project but may end up parting with it as I am toying with doing another backset manifold and using a smaller holset on the b3 instead of a regular vw td T3 or K24 unit. My AAZ b3 downpipe has the correct 4 bolt flange, etc. I haven't decided "for sure" but should know in a week or so what I'm going to do if you can wait that long. Its in great shape.
Otherwise, hunt for a AAZ b3 unit. Share the same chassis for the most part as the Mk3 cars...should work fine.
Joe
-
#6
by
zozep
on 07 Nov, 2008 06:46
-
PM sent.
If anyone has any other leads for me to get one while i'm pending with Joe...let me know.
-
#7
by
RabbitGTDguy
on 07 Nov, 2008 13:30
-
I'm probably going to go with the Holset...so I wouldn't need the dp. I'll let you know by the end of the weekend more than likely.
Joe
-
#8
by
stewardc
on 07 Nov, 2008 13:56
-
-
#9
by
zozep
on 10 Nov, 2008 08:31
-
PM sent to that guy... Any one else?
-
#10
by
Sandy
on 25 Nov, 2008 14:57
-
-
#11
by
VW_Commuter
on 25 Nov, 2008 15:02
-
-
#12
by
zozep
on 26 Nov, 2008 04:28
-
Got one now installed. It's pretty loud :shock:.