If anyone has the links to the 1.6/1.9 engines, hyrdo head on solid lifter block, solid lifter head on hydro block etc please post them and I'll add them.
Also any other links you think should be in there, or if a new category needs to be added, post it up.
Linking to other forums is a-ok
Posts will be deleted once they have been added.
Please let me know if there are dead links
I'm starting to get "The topic or board you are looking for appears to be either missing or off limits to you." screen.
Some of them still work.
I haven't seen this one in the homemade tools section. For removing the nut on the top of the strut I use a deep offset box end wrench. The following link shows a Snap-on set, but they look nearly identical to mine -- which have to be a thousand years old. http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=334&group_ID=539&store=snapon-store&dir=catalog
I'm thinking a guy could also take a cheap combo wrench, heat it up with a torch and "z" bend the box end to fit.
i took a 14mm deep socket, opened up the throat of it a bit, and cut the end of it so it had 2 notches to engage the nut on the mk2/3 strut assembly..
just forgot to add that to my home made tools section..
Hmm.. click step by step guide to changing intermediate shaft bearings.. and got:
The topic or board you are looking for appears to be either missing or off limits to you.
Is it gone?
Hmm.. click step by step guide to changing intermediate shaft bearings.. and got:
The topic or board you are looking for appears to be either missing or off limits to you.
Is it gone?
It's gone
Thanks for the heads up, I deleted the link
We should have a 'my car won't start', and a 'i got no history on this car, what do I need to take care of' article.
I'm pretty sure they are both written in here somewhere.
I have; starting car, if cold,esp. glow;pressinclutch,inneutral,pull cold start/somepeople don't pull
c/s(until first fires),start,when oil lite goes out, letoutclutch,rev *easily(apx2k).
check oil as needed, 1 week max check if you have tight motor.your air filter is the 1st thing to say on top of,napa filters are wix filters
Hi guys I got up this morning temperature had dropped over night
️
️opened up my mrk5 GTTDI and my passenger door wouldn't open all other doors would so I tried opening it from the inside and still no joy, so locked and unlocked it a few times and its working it it's happening often now there noises coming from the lock so there is something happening there but don't know what could there be something wrong with the mechanism its frustrating me now
could anyone help me
Sent from my iPhone using Tapatalk
thanks for the information