VW Parts sellers - General - VWDiesel.net The IDI, TDI, and mTDI source.

• VW Parts sellers by BMW on 08 Jul, 2008 14:20
• Does anyone in here buy from www.emiata.com ? I was thinking of the rebuilt AAZ pump, with 10mm rotor and so on, for a m-tdi project.
  
  I've searched in here and found out that some people had problems ? but so far only found.. 2 people or so?
  
  Is he generally a reliable seller?
  
  Thanks, didn't know where to post this.. so it' sin general now.
• #1 by burn_your_money on 08 Jul, 2008 16:19
• This should answer most of your questions
  
  http://vwdiesel.net/phpBB/viewtopic.php?t=14291
• #2 by zukgod1 on 08 Jul, 2008 21:27
• I've bought a few things from him with good results.
  
  There are some that have had a different experience.
  
  At this point I'll still be buying from him when it comes to some items.
  For a IP reseal I would say go ahead and get one from him, I bought mine from him, 10k miles and still fine.
  
  As far as internal engine parts/ gaskets etc I would contact Myke_m on this board.
• #3 by BMW on 09 Jul, 2008 00:03
• Quote from: "burn_your_money"

  This should answer most of your questions
  
  http://vwdiesel.net/phpBB/viewtopic.php?t=14291

  
  
  I've read that post, there's some feedback but it's more or less just a discussion about wheter he's products are brand names or chinese copies?
  
  Anyway, I just wanted to know if anyone in here had bought he's rebuilded IP's, and had some more good or bad feedback that I could use.
  
  The problem is, I don't want to make a pump myself, I'm afraid of ruining it, and I need my ride everyday. The pumps in europe are $$$$$ So it would be nice and cheap to get it from him.. if it works
• #4 by jimfoo on 09 Jul, 2008 08:29
• I have one of his heads on my pump, but I rebuilt it myself. After my engine ran away and I took it apart, the cam plate, which was his also, had some damage, though I can't say how it was before the engine ran away, I imagine it was from the excessive rpm's. The head itself seemed fine however. There have been a few complaints about the complete pumps on the list from what I remember, but who knows how many list members have bought them.
• #5 by zukgod1 on 09 Jul, 2008 08:39
• Quote from: "BMW"

  
  Anyway, I just wanted to know if anyone in here had bought he's rebuilded IP's, and had some more good or bad feedback that I could use.
  
  The problem is, I don't want to make a pump myself, I'm afraid of ruining it, and I need my ride everyday. The pumps in europe are $$$$$ So it would be nice and cheap to get it from him.. if it works

  
  
  
  I would recommend getting a pump built by Giles..
  It would be spendy but you WONT have problems with it..
  
  Other wise I would recommend buying the kit and building it your self.
  There is allot of info on line as to the parts orientation so you can get it re assembled correctly.