VW LT pump 0 460 424 138 for mTDI? - mTDI Mechanical TDI Conversions - VWDiesel.net The IDI, TDI, and mTDI source.

• VW LT pump 0 460 424 138 for mTDI? by BGA on 11 Jun, 2008 17:36
• I have found this pump at a scrapyard
  http://picasaweb.google.se/bogunnar.andersson/MyPictures
  It is a Brazil built 0 460 424 138.
  Will the TDI 1.9 belt drive fit?
  4 cyl LT pumps from around 97, 98 has been mentioned in this forum as suitable for mTDIs. Is this the PUMP?
  If yes, what else changes has to be done to get a good mTDI pump?
• #1 by BGA on 11 Jun, 2008 17:59
• Its a LT 46 -99
  engine code AGK
  92 kW
• #2 by snakemaster on 13 Jun, 2008 13:54
• to me that looks like a good pump to put on a mtdi but  the ofset of the pump pully could be out  due to that adapter plate
• #3 by westyman on 19 Jun, 2008 23:17
• Yes, it is one of the best options. If you have a 1Z/AHU/AFN, the stock TDI pump pulley fits directly. If you have a later engine you'll need to swap over the hub and pulley both from the original electronic pump. This pump is as close to bolt-on-and-run as you can get. You''l want to run some bigger nozzles though.
  
  Karl
  
   

  Quote from: "BGA"

  I have found this pump at a scrapyard
  http://picasaweb.google.se/bogunnar.andersson/MyPictures
  It is a Brazil built 0 460 424 138.
  Will the TDI 1.9 belt drive fit?
  4 cyl LT pumps from around 97, 98 has been mentioned in this forum as suitable for mTDIs. Is this the PUMP?
  If yes, what else changes has to be done to get a good mTDI pump?