WTT/FS: Good K14 for a similar T3 or K24... - page 1 - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• WTT/FS: Good K14 for a similar T3 or K24... by RabbitGTDguy on 27 May, 2008 06:34
• Hey guys, I have a good K14 here that I had considered using on the mTDI engine that I am building for the b3, but think I'd rather prefer to go to the T3 or the K24 given several factors and the fact that I'd like to be up in the 20psi range with the motor eventually. I just think the k14 is too small for my needs at this point. So, I'm offering it for sale...or for trade.
  
  The turbo is clean and tight when it comes to wear specs on it. Spins without issue with the exception that it could use some oil squirted on the inside to make that even smoother.  No cracks, damaged fins. etc. Very little side play, no vertical play on the shaft whatsoever. Wastegate is also in great shape too.
  
  I can take a pic here if need be. I'm looking to trade for a T3 or a K24 (prefer the T3) of similar condition.
  Otherwise, I may entertain offers on the k14
  
  Let me know.
  
  Joe
• #1 by blkboostedtruck on 27 May, 2008 15:03
• Joe i gotta K24 in good shape came from Tyler!
  does your K14 have a return oil line say like for a 1.9?
  can you E-mail me pics. to my regular e-mail?
  thanks Duane
• #2 by RabbitGTDguy on 27 May, 2008 18:10
• Duane, I'll take a few pics...
  
  Damn...K24s flying at me out the wazoo.... I'd really like to find a T3 but alas....just need more boost than the k14 can provide me with.
  
  This k14 has the singular circular flange/hole for the oil return.
  
  Joe
• #3 by blkboostedtruck on 27 May, 2008 19:27
• Quote from: "RabbitGTDguy"

  Duane, I'll take a few pics...
  
  Damn...K24s flying at me out the wazoo.... I'd really like to find a T3 but alas....just need more boost than the k14 can provide me with.
  
  This k14 has the singular circular flange/hole for the oil return.
  
  Joe

  
  
  i have a T3 but i think it needs a rebuild bad? bad E-bay buy i did!
  i also have a K14 but i'm also in need of the oil return line for it!
  Tyler says he has one but i'm need of a oilline ASAP
  but the K24 i have has no shaft play!
  well let me know/
  thanks Duane
• #4 by burn_your_money on 27 May, 2008 19:37
• your oil line goes out tomorrow Duane. Sorry, I didn't realize it was rush, thought it was the normal "next time you are at the post office" type of deal we usually have.
• #5 by blkboostedtruck on 27 May, 2008 19:47
• Quote from: "burn_your_money"

  your oil line goes out tomorrow Duane. Sorry, I didn't realize it was rush, thought it was the normal "next time you are at the post office" type of deal we usually have.

  
  
  Tyler sorry!
  i thought it was the mail taking so long i thought you mailed it months ago?
  no problem! thanks Tyler it still is the same deal like always buddy   :wink:
  Duane
  
  Edit:   Tyler if joe like's you can vouch for that K24 i got from you? wouldn't mind having another K14 though!
• #6 by burn_your_money on 27 May, 2008 20:02
• you will need to refresh my memory a bit more, apparently I've sent you a few turbos
• #7 by blkboostedtruck on 27 May, 2008 20:08
• Quote from: "burn_your_money"

  you will need to refresh my memory a bit more, apparently I've sent you a few turbos

  
  the K24 you sent me last year with the I.P. that needed the throttle shaft!
  when you forgot i think the oil feed line ? or wait it had that chewed up return line on it!
  remember?
  Duane
• #8 by RabbitGTDguy on 28 May, 2008 03:51
• I'm interested Just "prefer" the t3's...thats all. K24 will do fine for now.
  
  Joe
• #9 by quietmission on 28 May, 2008 06:13
• I also have a T3 that i bought from Tyler as well and he said that it appeared to be in fair shape.  No manifold for it but you can see it in the first pic in this link.  It's a little dirty though but let me know if you are interested.
  
  http://www.vwdiesel.net/phpBB/viewtopic.php?t=11787&highlight=130whp
  
  
  Thanks!
• #10 by RabbitGTDguy on 30 May, 2008 18:09
• Here are pics of the unit that I have. I've cleaned it up more since...but its in GREAT shape...
  
  
  
  
  
  
  Will pm...fell behind on this...
  
  Joe
• #11 by RabbitGTDguy on 04 Jun, 2008 04:02
• Cleaning this up this weekend...
  
  Still have it though...
• #12 by blkboostedtruck on 12 Jun, 2008 09:33
• so whats going on with this Joe! still got it?
  let me know?
  thanks Duane
• #13 by RabbitGTDguy on 12 Jun, 2008 13:39
• yeah, still have it. Still waiting for a t3 to come through or then I'll settle for the K24...
  Haven't heard from a few others regarding what they had intially...going to make a move here soon though as I'd like to have it...
  
  Joe
• #14 by blkboostedtruck on 12 Jun, 2008 21:03
• P.M. sent about T3 to Joe
  Duane