Looking to borrow or buy dial gauge and adaptor in Vancouver - Troubleshooting - VWDiesel.net The IDI, TDI, and mTDI source.

• Looking to borrow or buy dial gauge and adaptor in Vancouver by neimis on 13 Apr, 2008 19:25
• I need to check the pump timing, engine is running too rough (clatter) and with too much white and black smoke. Does anyone have a dial gauge indicator and adaptor they would be willing to loan? I'm in Vancouver (North Van, actually).
  
  I tried looking for one to buy around here but came up empty, the one at North Shore AutoParts can't be adapted to fit...
  
  I looked online and e-bay, but with the border hassles and shipping time, it's not too attractive.
  
  Any suggestions on where to find one? I'd like to get this attended to as soon as I can, don't want to damage anything with advanced timing
  Thanks for any help
• #1 by bigblockchev on 13 Apr, 2008 19:39
• I got a set from the guy at emiata.com for about $70 or so.  This is probably your best bet, then you can check anytime you want. cheers Dan
• #2 by subsonic on 14 Apr, 2008 05:56
• I'm in the same boat.  I just ordered a kit from a guy in germany.  Came out to 100.00 with shipping.  I don't know how long it will take to get here, but I need to use one pretty darn quick.
• #3 by commuter boy on 14 Apr, 2008 19:02
• I've got one you can borrow for a deposit, or you can check your timing in my carport if you want, I've got the tools.  PM for contact info.
• #4 by jtanguay on 14 Apr, 2008 19:10
• Quote from: "subsonic"

  I'm in the same boat.  I just ordered a kit from a guy in germany.  Came out to 100.00 with shipping.  I don't know how long it will take to get here, but I need to use one pretty darn quick.

  
  
  those german kits are awesome! the cam lock plate is bang on.  you'll even need to tap it in because its so tight (just the way it should be  :wink:)  even the pump lock!... unfortunately i lost mine  :x  i got mine from ebay... where did you manage to find yours?
• #5 by subsonic on 14 Apr, 2008 20:33
• Same place you did, e-bay.
  
  I need to get my golf running with the old motor.  My truck has died and I need another car for work.  My tranny and new clutch kit are in route, but my franken head is still a week or two away from being done at Daves shop.  I need to fire up the old beast that has been sitting for a year and get her to run for another few weeks.  I am sure the timing is off, and I need new injectors, these are original 1985 units.  Compression is low and there is blowby, but I think she will run.  It's a mech head so I will need to check valve clearance as well, havent done it in like 50k.
  heres the link:
  http://cgi.ebay.com/ebaymotors/VW-Audi-Jetta-Diesel-Injektion-timing-Set-New_W0QQcmdZViewItemQQcategoryZ35625QQihZ004QQitemZ140224214029QQrdZ1QQsspagenameZWDVW
• #6 by neimis on 15 Apr, 2008 13:37
• Thanks for the replys.
  
  commuter boy, I might take you up on your offer. I'm out of town right now, and am going to try to check out another option for buying one...
  
  Will know in a couple of days. Thanks for the offer.
• #7 by neimis on 21 Apr, 2008 16:16
• commuter boy, please check your pm, Neil