WTB crank vent tube - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• WTB crank vent tube by flash319 on 10 Apr, 2008 16:05
• I broke the crank vent tube that runs up to the valve cover from the block.  It is on a 1.9 but I think a 1.6 would be the same.
• #1 by Quantum TD on 10 Apr, 2008 19:31
• 1.6 didn't come with a crank breather tube: at least not the ones I've seen. You've got a 1.9. Everyone I've ever seen used has been cracked. Good luck.
• #2 by flash319 on 11 Apr, 2008 10:37
• Called dealer and they have one for $50.  I thought it would be more.  I think I will just get a new one.
  
  Thanks
• #3 by stewardc on 12 Apr, 2008 08:06
• I made a steel plate and welded a fitting to it, then I ran a plastic line the rest of the way. Be creative. Mine will end in the can below so that I get no oil in the turbo.
  
  
• #4 by myke_w on 13 Apr, 2008 11:08
• it's part # 028103491J, dealer list is about 53 bucks
  
  came on all aaz and ahu
• #5 by jimfoo on 13 Apr, 2008 11:41
• Quote from: "stewardc"

  I made a steel plate and welded a fitting to it, then I ran a plastic line the rest of the way. Be creative. Mine will end in the can below so that I get no oil in the turbo.
  
  

  
  You should have a dielectric union on that water heater. Nice catch can though.
• #6 by stewardc on 13 Apr, 2008 13:06
• Quote from: jimfoo

  You should have a dielectric union on that water heater.

  Quote

  
  
  Agreed....dumb plumber !