-
#15
by
zukgod1
on 21 Apr, 2008 15:16
-
-
#16
by
saurkraut
on 22 Apr, 2008 06:39
-
Before IC I was hitting 40spi (spikes) and would hit 30psi regularly, pulled way hard.
Post IC I can hit 25 if I REALLY try, seems to be restricting the air flow as before IC @ 30psi there was a slight haze out the back and now there is a black cloud at the same gear/RPM.
?
From the Ebay add:
"Working Pressure: 10~30PSI:"
"Pressure Drop 1~4psi@35psi"
Looks like its doing exactly what its advertised to do.
Its too small for your application.
-
#17
by
OM617
on 22 Apr, 2008 06:43
-
I agree, a 1-4psi drop is terrible. If you see more than a 1psi drop its too small.
-
#18
by
zukgod1
on 22 Apr, 2008 07:13
-
So crap,,,
I dont think I can fit a larger one..
Looks to me like they put the same info on dang near all thier IC listings.
Kinda like a generic form..
I could prob fit a taller one if I went behind the front bumper. like a 11" tall one, but the listing as to pressure drop is the same..
-
#19
by
jimfoo
on 22 Apr, 2008 07:21
-
Put one behind the bumper as well. Run 2 in parallel.
-
#20
by
zukgod1
on 22 Apr, 2008 07:28
-
Put one behind the bumper as well. Run 2 in parallel.
Why not just run a taller single?
Way less plumbing.
-
#21
by
jimfoo
on 22 Apr, 2008 07:35
-
Well I thought you said you couldn't fit a larger one. If you can go taller, then by all means, that's the way to go.
-
#22
by
zukgod1
on 22 Apr, 2008 07:45
-
I mean really, I dont mind buying a larger IC (if I can fit it).
The one I have now will work fine for a stock engine just doesnt work like I want for the amount of fuel I'm pushing through.
I need to go out there with a tape measure I guess..
-
#23
by
zukgod1
on 22 Apr, 2008 07:49
-
Well I thought you said you couldn't fit a larger one. If you can go taller, then by all means, that's the way to go.
I have a Sawzall, if I REALLY want to I can fit a larger one :twisted:
-
#24
by
jimfoo
on 22 Apr, 2008 07:57
-
Hehe, that's what I did to my entertainment center when I wanted a bigger tv. :lol:
-
#25
by
zukgod1
on 22 Apr, 2008 08:27
-
So it's the general opinion then if I get a larger IC (more internal capacity that I will lessen the problems I'm having now correct?
I'm going to go see if I can get a larger one in there somehow, thinking of a 27x12x3.
Not to sure how I'm going to get from my 2" piping to a 2.5 or 3" inlet/outlet,,??
If it was a straight shot it wouldn’t be a big deal I don’t think but I have a 45deg bend in the inlet..
SH*T!!
-
#26
by
OM617
on 22 Apr, 2008 08:31
-
-
#27
by
zukgod1
on 22 Apr, 2008 08:42
-
Close, I need 45deg not 90deg..
-
#28
by
jimfoo
on 22 Apr, 2008 08:53
-
just do a search then as I have seen 45 and other degree silicone bends on e-bay. If you want it, it is there. :lol:
-
#29
by
zukgod1
on 22 Apr, 2008 09:10
-
just do a search then as I have seen 45 and other degree silicone bends on e-bay. If you want it, it is there. :lol:
I know I know, I'm just lazy and cant do E Bay @ work so I have to wait till later tonight when I'll certinally get busy and forget till I get to work tomorrow when the cycle starts over
