need help finding right speedo cable for my rabbit w/ahu/02a - General - VWDiesel.net The IDI, TDI, and mTDI source.

• need help finding right speedo cable for my rabbit w/ahu/02a by estimatd on 02 Oct, 2007 14:45
• Hello, I recently had an AHU with an 02A tranny swapped into my Caddy and I am really not sure what to do for a speedo cable.  I've heard that the early Corrado G60 cable works for a mk2, will it work in a mk1 instrument cluster as well?  Thanks in advance.
  -Charlie
• #1 by BlackTieTD on 02 Oct, 2007 15:17
• i think corrado/mkII has a retaining clip to hold the cable to the speedo, while mkI is screw-on. afaik..
  
  i'm sure it could be adapted
• #2 by estimatd on 02 Oct, 2007 15:23
• just meaning that I would need to find an alternate way to hold the cable in place?  thanks.
  
  -Charlie
• #3 by estimatd on 02 Oct, 2007 15:28
• is there a more suitable cable for this setup?
• #4 by mk2tdi on 04 Nov, 2007 06:59
• any mk2 1.3 ones will fit
• #5 by MJF on 04 Nov, 2007 08:20
• Quote from: "mk2tdi"

  any mk2 1.3 ones will fit

  
  
  But isn´t mk2 speedo with clip on? I have mk1 Passat cable, it´ll fit directly.
• #6 by mk2tdi on 04 Nov, 2007 09:32
• Quote from: "MJF"

  Quote from: "mk2tdi"

  any mk2 1.3 ones will fit

  
  
  But isn´t mk2 speedo with clip on? I have mk1 Passat cable, it´ll fit directly.

  it clips into the back of the clocks as its the same for mk1 and mk2 golfs and screws into the speedo drive on the gearbox
• #7 by MJF on 04 Nov, 2007 09:47
• My mk1:s had screw in speedos, not clips.
• #8 by mk2tdi on 04 Nov, 2007 11:29
• maybe there different to the uk version?
• #9 by estimatd on 04 Nov, 2007 15:07
• yeah, mine screws in as well, it probably is different in the UK then.......
  
  for future reference of anyone attempting the same, I posted this question on the vortex and the answer can be found here http://forums.vwvortex.com/zerothread?id=3472903 or do a search for Shawn B on the vortex and follow his build up, the info is on pg. 13.
  
  "The piece that comes off from the Rabbit cable is the aluminum threaded collar that turns onto the Rabbit speedometer. I believe bajaguy carefully cut the end off where it was crimped on using a air cut off wheel or a cut off wheel on the grinder (you get the idea, carefully cut it off then clean up the hole to put it back on the O2A cable. Same idea with the O2A cable but this one is plastic, carefully cut /remove the plastic end that connects to the speedometer not pulling the inner steal sheathing around the inner square cable apart. Then carefully crimp the rabbit end onto the O2A cable end."
  
  
• #10 by MJF on 05 Nov, 2007 07:05
• Yep, Passat cable is just like that.
• #11 by estimatd on 05 Nov, 2007 19:39
• so you're saying that there is a Passat cable that would screw on just like my Rabbit?