VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: erice1984 on December 11, 2010, 10:14:04 pm

Title: NEEDED: 5 speed selector lever
Post by: erice1984 on December 11, 2010, 10:14:04 pm

Need a part.  Here is the P/N  171711177c

Marked with green.

(http://img718.imageshack.us/img718/6931/shiftcomponents.th.jpg) (http://img718.imageshack.us/img718/6931/shiftcomponents.jpg)

Here is actual picture of the part.  It is the one on the top left.

(http://img217.imageshack.us/img217/1360/5spdvs4spd.th.jpg) (http://img217.imageshack.us/img217/1360/5spdvs4spd.jpg)

Title: Re: NEEDED: 5 speed selector lever
Post by: ktzdsl on December 12, 2010, 04:43:29 am

I think I have one. I can check by 8:00am CST and let you know for sure. Where are you located? 

Title: Re: NEEDED: 5 speed selector lever
Post by: ktzdsl on December 12, 2010, 06:53:05 am

Sorry, none left in our stash.

Title: Re: NEEDED: 5 speed selector lever
Post by: Quantum TD on December 12, 2010, 08:34:44 am

If you're converting to 5-speed from 4-speed, you'll also need the shifter base/box. They're different too. If you have worn bits, it will be a pain to adjust the linkage in order to hit reverse and 5th.

Title: Re: NEEDED: 5 speed selector lever
Post by: R.O.R-2.0 on December 12, 2010, 09:11:00 am

Quote from: Quantum TD on December 12, 2010, 08:34:44 am

If you're converting to 5-speed from 4-speed, you'll also need the shifter base/box. They're different too. If you have worn bits, it will be a pain to adjust the linkage in order to hit reverse and 5th.

you just need the pieces from under the hood.. i used my stock 4 speed shifter rod, and everything else was out of a 5 speed.

Title: Re: NEEDED: 5 speed selector lever
Post by: ilikevwdiesel on December 12, 2010, 10:23:05 am

sent a couple pms

Title: Re: NEEDED: 5 speed selector lever
Post by: theman53 on December 12, 2010, 06:33:16 pm

Sorry. It is only supposed to get up to 9F tomorrow and I won't be going after the GTI for parts until it is warm. Or I think I could do it and not freeze. I would have gotten it for you though, I just ran out of time :(

Title: Re: NEEDED: 5 speed selector lever
Post by: erice1984 on December 14, 2010, 07:37:37 pm

its alright.  Lucas.  I figured you were busy.

I just needed that lever part, I got the shifter base, and linkage and bushings on the way.

So I should be ready to throw the 5spd in it.

What I do need still is an AAZ.  but I need to get more money first.  or if any canadian has a good one that will let go for around 6-700 bucks that does NOT blow oil out the exhaust I could drive to pick it up given a decent day.