View full version: IDI Engine
  1. Windage Tray Bolts
  2. Oil coolers?
  3. Removing downpipe-How difficult?
  4. CV Joint
  5. Can a tuned AAZ have about the same HP and torque output as.
  6. 1.6td 170hp 290nm powered by holset :)
  7. mk2 vs 8 point buck
  8. intermediate shaft seal
  9. wanted - flange for k14 turbo???
  10. Optimum Position for EGT Probe On Manifold
  11. Is my pump worn?
  12. Head/ rings / crankcase pressure??
  13. Garrett t25's, log manifolds...
  14. Smoke
  15. oil level up but on startup light is blinking
  16. Which piston ring?
  17. simple glow plug circuit?
  18. Help identifying a bad lifter
  19. my tach is reading low....but why???
  20. can I swap in a gasser radiator?
  21. anyone bought parts from Westportparts?
  22. The merits of proper tools
  23. valves (intake and exhaust )
  24. Governer mod on my 1.9
  25. no power in upper RPM **Now with Video.
  26. 85 Golf IP Timing
  27. valve spring compressor
  28. One last question on timing belt tension..
  29. 1.9 troubles
  30. Con rod bolt torque
  31. A small conclusion about a vnt15 NA, and some vids.
  32. Fuel screw stuck?
  33. Reccomendations on replacing the turbo -> intake pipe?
  34. got a new toy today!!!
  35. feeler; thoughts on a G60 supercharger on TD engine ?
  36. MkIII AAZ Clutch vows!
  37. Oil pressure
  38. Can't make boost past 15PSI
  39. What is everyone running for EGTS?
  40. See the "Jetta Nose" on the mid engine 1.6TD singl
  41. Which VNT can support 150hp to the wheels
  42. fuel line check valve - whats its real purpose?
  43. Tach
  44. My first ever performance upgrade!
  45. Just got done with TT downpipe install
  46. R&R'ing same IP - does timing need to be set?
  47. Stupid Head stud Question
  48. Adjustable Cam Gear on a 1.6L TD or D?
  49. SOLDSOLDSOLD
  50. Pump rebuild for a newbie