View full version: IDI Engine
  1. head gasket thickness 1, 2, 3 notch???
  2. 2 psi boost from an AAZ
  3. Well this can't be good
  4. Flywheel Machining?
  5. oil leak from head gasket
  6. fill hole for 5 spd?
  7. Diesel won't start, fuel issue?
  8. First mod advice Please!
  9. sinking brake pedal
  10. Oil cooler!
  11. A friend wants to sell me his 81 NA rabbit
  12. Installing studs without removing head
  13. ARP head studs in Vanagon
  14. Hydraulic lifter head gasket on mechanical lifter 1.6
  15. Wastegate weirdness
  16. It's NOT all over...
  17. 1.9 Crank in 1.6 Block?
  18. exhaust gasket doughnut thing removal
  19. Low oil pressure AZZ
  20. new clutch for my FF trans
  21. clutch trouble
  22. starting problems
  23. 1.6D a/c mounting bracket help
  24. missing backing plate for pressure plate
  25. problem with a 1996 jetta
  26. K14 Mounting Flange
  27. K14 A/R's and trims & where to get one
  28. Insane miles
  29. Removing the Oil Cooler
  30. Engine swap question
  31. Intercooler on a GTD. Any good?
  32. Is Turboing a n/a a bad thing?
  33. Procedure for disassembling a vnt-15?
  34. What diesel starter do I need?
  35. Pressure plate bolts?
  36. Coolant T at the head thing
  37. TD IP question
  38. AAZ VNT Caddy Project
  39. Mud Boggin Samurai with a 1.6 Turbo Diesel.
  40. help with starting
  41. 1.6 manifolds on an AAZ
  42. retarded vs advanced timing
  43. 1.9 AAZ crank bolt Tightening
  44. 50 degree 1.6 td into '86 vanagon
  45. Coollant temp
  46. Merc nozzles wrecking a AAZ
  47. m-tdi w/ 1.6 pump
  48. Trick for Final Drive c-clip install?
  49. Cartridge style TDI oil filter retrofit possible?
  50. prothe/emiata heads - experience?