View full version: IDI Engine
  1. Two 1.6L mech head rebuild questions
  2. Swain Tech is GOOD stuff....
  3. Operating oil pressure
  4. IP Shaft Seals
  5. I need a straight answer! How much boost is safe???
  6. Almost ready to swap transmissions 4sp to 5sp
  7. the fuel filter!
  8. Xtreme 4x4 and Performance Diesel Injection
  9. AAZ governor mod?
  10. Trubo hot side problem
  11. audi 5000 diesel and a k26?
  12. Performance cam for mechanical heads
  13. 1.6td value
  14. Turbo upgrade, which one.
  15. RadoTD's EGT and boost gauges
  16. What is the best exhaust setup?
  17. Water pump idler pulley
  18. a few moar n00b ?s
  19. Is the vac pump supposed to move?
  20. Will a Beetle 1.9 turbo fit?
  21. need info on GTD high output engine?
  22. 1.6 TD combustion prechambers (new) are available
  23. Different size wheels on one axle?
  24. How to remove turbo
  25. Bosch nozzles
  26. Headbolt or stud question
  27. I bought an AAZ trying to comp test, what starter to use?
  28. Mech head on Hydro block??
  29. NA IP vs TD IP
  30. 95 Passat AAZ tranny swap
  31. Tuning the EcoPump
  32. Quick question, hopefully this weekend to have an answer.
  33. Intake Mods
  34. Perplexing Turbo dilemma...
  35. Compression Results for GTD :(
  36. Auxilliary oil separator: Reduce oil consumption, prevent runaway.
  37. Built 1.6TD into Audi 90 quattro
  38. Clutch replacement in 1.9 AAZ TD - 82 Vanagon
  39. Done the governor mod, but I need HELP!!!(missing idle spring on the governor)
  40. boost guage needle erratic
  41. 190mm clutch in a 200mm flywheel/pressure plate?
  42. Hybrid turbo
  43. Dripping engine cap
  44. What is on this intake manifold?
  45. Project 12mm in full swing
  46. Lacking boost with K14
  47. VW 92 Golf with 1.6L diesel
  48. oversize piston pins
  49. Cylinder Head Oil baffle
  50. ARP con rods bolts