View full version: IDI Engine
  1. changing coolant temp sensor without spilling coolant?
  2. Will a lift pump affect timing?
  3. GTD injectors ad nozzels and t2 tubro
  4. 1.6 td IP idle
  5. 1Y head on a 1.6 TD
  6. Mk1 fuel check valve ?? Engine cranks not starting.
  7. IP base fuel pressure
  8. Additives
  9. snapped timing belt and blown headgasket.
  10. tickey lifter?
  11. 1.6TD Turbo upgrade ?
  12. Altitude sensing = boost sensing?
  13. Fuel screw leaking?!?!
  14. VNT rebuild questions
  15. how do you adjust turbo boost on an AAZ?
  16. 1.6TD head on a 1Y block???
  17. need help with coolant temp sensor resistance
  18. Solid Lifters in two drain holed head?
  19. no start (with a twist)
  20. K14 gasket ???
  21. timing belt install question
  22. #2 main cap broke on aaz
  23. Twin plenum design questions? - Now finished 1Y based manifold
  24. MK3 Golf Big Build
  25. Gauging interest for repro GTD badge
  26. Best Way to Store an Injection Pump?
  27. early 1.9TD injection pump on a 1.6TD motor???
  28. 1.6GTD head gasket and engine specs
  29. High Rev'ing
  30. Vnt install
  31. k03 turbo rebuild question
  32. 1.5D cam in a 1.6TD mech head?
  33. Exhaust tubing diameter for AAZ?
  34. overheating question???
  35. some pics of my mk1 project
  36. Hard work pays off
  37. Teh White Rabbit Build.
  38. t3 waste gate can removal
  39. Injector cleaner
  40. Can't set injection pump timing with dial indicator
  41. Can I use a VW 1.6TD crank and intermediate shaft in an 81 - 1.6D motor rebuild?
  42. Alternator squeal after engine start
  43. What happened to prothe?
  44. aaz with a 92 tach reading to high
  45. flex exhaust tubing
  46. Can I put injection pump top with LDA off 1.9TD or 1.6TD onto a 1.9NA pump?
  47. K24 Turbo Map
  48. 1.6 or AAZ gasket
  49. AAZ oil consumption / overfill?
  50. glove box light