View full version: IDI Engine
  1. The old blue rebuild (1983 1.6 TD)
  2. Blown oil seals, upgrade to VNT?
  3. By passing the air compressor.
  4. injection pump top cover seal replacement
  5. How the hell do you get the camgear off???
  6. What exactly is a GTD?
  7. Why is my mileage so much lower than others claim?
  8. weird oil pressure behaviour
  9. K24/T3 turbo on AAZ
  10. Diesel Troubles, can't start (86 td jetta)
  11. Internal IP pressure specs
  12. thread locker vs. antisieze; silicone vs. gasket; freeze plug sealant
  13. Found new AE prechambers
  14. Where to get a set of Injectors Pop Tested near Seattle?
  15. 11MM ARP studs for my old 1.6?
  16. k14 highway psi
  17. What's Up, Doc?
  18. ARP thread corrosion
  19. Break in and head bolts
  20. Gas leak on top of IP
  21. Flushed brake fluid- what about the clutch?
  22. Looking for someone with IDI timing tools around Abbotsford, BC
  23. VE pump accelerator shaft O ring size
  24. 1997 jetta tdi or idi?
  25. k16-2467, possibly the best turbo for a 1.6
  26. Differences between early 80's and late 80's 135bar N/A Injectors
  27. A Milestone for the Eco in Florida
  28. Blown pump seal-runs fantastic!
  29. 107a or 109 pump- specs? / which to use?
  30. MOAR POWA
  31. The quick resurrection and fuel mileage of a 1989 Jetta Diesel
  32. Cold Weather WOW!
  33. -
  34. Need help- 1.6TD cooling hose NLA - alternate hose ?
  35. 81 Caddy Dying..
  36. Best combination of Motor Mounts for a MKII
  37. Where to purchase MK-1 Caddy Diesel Sending unit, hoses, and gravity valve?
  38. Rust in 1 cylinder....
  39. VNTs on TDIs
  40. Need to turn down the smoke
  41. Ideas wanted - AAZ Diesel stalling at idle
  42. New engine..
  43. 35 psi boost and resultant running problems
  44. do i need to check my egt's on a vanagon AAZ
  45. replacing the intermediate shaft bearings
  46. 1.6 N/A actual performance testimonials!
  47. Look at what I've been up to lately
  48. Special socket for IDI injection pumps
  49. G60 intake manifold
  50. what, if anything, happens if you don't set max rpm stop on 1.6td pump?