View full version: IDI Engine
  1. torque spec for injectors?
  2. ADJUSTABLE BOOST COTNROL SCHEMATIC
  3. Down pipe
  4. Turbo balancing
  5. Way too much smoke - how to fix
  6. how fast
  7. LDA INSTALL
  8. oil feed and drain ok if not vertical?
  9. glow plug trouble
  10. Bottom end rebuild...
  11. getting the alternator belt off!!
  12. IP's interchangeble?
  13. Turbo for 1.9
  14. Where to put pyrometer
  15. What is it?
  16. electrical switches on IP?
  17. 1.5TD first start
  18. Degreeing the cam in
  19. What is it?
  20. What is it?
  21. Plunger heads...........need info/help
  22. 1.6L TD newbie
  23. Motor Rebuild Motivation!
  24. mk1 down pipe
  25. AAZ tuning and interchangable
  26. 20 PSI, can't lower it
  27. TDI crank & pistons
  28. torque gain from swapping transmissions...
  29. 1.6L Turbo Diesel engine weight (MF code)
  30. Happy Turbo 1.9 2500-3000RPM?
  31. aftermarket exhaust on AAZ?
  32. Which turbo manifolds are better? MK1 or MK2?
  33. Bore/blueprint
  34. gasser to idi wiring
  35. 1600td t3?
  36. valve cover studs
  37. TD versus NA question
  38. info: VE BOSCH service book and DIY injector pop tester
  39. 2 issues with my rabbit
  40. RA & SB engine turbos
  41. head
  42. 10mm shaft
  43. Another turbo identification ... help
  44. Performance question
  45. new and from cali
  46. is a 197* thermostat too hot?
  47. EGT Gauge Post Turbo?
  48. OEM tach, what happens if I spin past redline?
  49. mk1 & mk2 down pipes?
  50. Glowplug timing control/newbie, help