View full version: IDI Engine
  1. sound proofing a vanagon diesel 1.9 na
  2. I need a k03 used turbo
  3. Head Gasket Thickness
  4. passat 1.9 and 02a box
  5. Freeze Plugs
  6. Cleaning oil out of cooling system 1.6 Rabit PU
  7. Seat belt pics
  8. garret t3 rebuild questions
  9. In vancouver need injector lines HELP!!!!!
  10. Bosch rebuilt injectors - my experience
  11. Paranoid about dropping a prechamber
  12. boost spike on AAZ stuck wastegate?
  13. Coolant temp gauge reading is lower after new head gasket
  14. Reboot 1.6
  15. Engine advice
  16. Getting ready to install new injector nozzles in my 1V Ecodoiesel
  17. Blow by on a rebuild???
  18. Bently head gasket torque procedure
  19. That Smell
  20. bad vibrations...... and no TDC mark on flywheel...
  21. is this still a good donor for a 11mm pump swap?
  22. Timing question
  23. can you install an injection pump turbo top to a na lower half?
  24. bad starter on 1.9TD
  25. kkk or garette ?
  26. no diesel out of injector lines after pump rebuild
  27. North America's First Turbo Diesel VW Fox
  28. Poll: Convinced into a state of uncertainty
  29. K24 Question
  30. cold start coolant temp sensor
  31. Motor Serial Numbers
  32. Lots of clatter from 10mm hybrid pump on franken motor
  33. aaz fuel filter question
  34. looking at this mk1 (L version)..... thoughts?
  35. Air cleaner suggestions wanted
  36. Coolant filter
  37. Buzzing Noise AAZ vanagon
  38. Injection pump timing on a 1.6/1.9 franken engine
  39. aaz why not remove the balancer from the sprocket?
  40. Rebuilding an IP
  41. Head gasket job time
  42. Rebuilt turbo now bluish white smoke, bad news?
  43. 1.9 head porting pictures anyone?
  44. pulse time AAZ?
  45. freshening up an aaz for vanagon install, lots of questions !
  46. Torque/Power on Boost
  47. Drunk Valve
  48. Used TTY (stretch) cyl head bolts- how much do they stretch?
  49. Badly corroded radiator and aux fan switch
  50. Where does this piece go?