where to get 1.6 rebuild kit? - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• where to get 1.6 rebuild kit? by the4ork on 21 Jul, 2007 01:47
• i have a 1.6 n/a that im wanting to turbo charge... my machinist is adding in aba oil squirters...
  
  now i need a complete rebuild kit for a mechanical lifter 1982 diesel engine... without the pistons...
  
  need pretty much everything else... need guides, guide seals, headgasket, valve cover gasket, timng belt, all the gaskets to the block, main and rod bearings (cam bearings? intermediate shaft bearings?) ect. ect.
  
  the entire engine was disassembled and hot tanked
  
  (will TD pistons fit n/a rods?)
  
  is there a diesel specific bently?
• #1 by Justin on 21 Jul, 2007 07:54
• vwdieselparts.com
  
  Jack has what you need and is great to deal with
  
  good luck
  Justin
• #2 by burn_your_money on 21 Jul, 2007 09:47
• Mike_w on the site is also good to deal with.
  
  Do you want a set of TD oil squirters instead of the ABA?
• #3 by Audi80 on 21 Jul, 2007 12:33
• Quote from: "the4ork"

  
  will TD pistons fit n/a rods?
  

  
  
  Yes, they will fit.
• #4 by CoolAirVw on 21 Jul, 2007 17:06
• Quote from: "burn_your_money"

  Do you want a set of TD oil squirters instead of the ABA?

  
  
  What does ABA mean?  
  
  You got some TD squirters for sale?
• #5 by burn_your_money on 21 Jul, 2007 19:12
• ABA is the engine code for the 2.0 gasser found in mk3s
  
  Yeah I have a couple of sets for sale (TD squirters)
• #6 by subsonic on 21 Jul, 2007 19:19
• Quote from: "CoolAirVw"

  Quote from: "burn_your_money"

  Do you want a set of TD oil squirters instead of the ABA?

  
  
  What does ABA mean?  
  
  You got some TD squirters for sale?

  
  
  I do believe they where one of the super bands from the 80's.  
• #7 by the4ork on 21 Jul, 2007 20:41
• Quote from: "burn_your_money"

  Mike_w on the site is also good to deal with.
  
  Do you want a set of TD oil squirters instead of the ABA?

  
  
  i was only going to use the ABA squirters because i have a blown aba block from my 2.0T project... one of them was tweaked when i cracked a piston but i was able to bend it back into place...
  
  i dunno if they squirt differently but im willing to givem a try, hell maybe they'll squirt more?