Author Topic: VDO non powered Pyrometer connector (Read 2321 times)

GTD. · « **on:** July 19, 2007, 02:04:31 am »

Just got a VDO non powered pyrometer with a 2 pole push in connector (I was expecting two screw terminals)

Anyone know where can I get a cable for this?

stewardc · « **Reply #1 on:** July 20, 2007, 04:47:48 am »

Don't those terminals just take regular spade connectors?

Vincent Waldon · « **Reply #2 on:** July 20, 2007, 09:47:00 am »

Yeah, I've never seen that style before... might mean it uses a preamp ?? If is does plug directly in in will be a special part since it will need to be metalically compatible with the thermocouple.

Are there any identifying part or model numbers on the gauge ?? If so, a bit of time on the Siemens site might score you the installation manual and/or an accessories list.

GTD. · « **Reply #3 on:** July 20, 2007, 11:51:39 am »

The terminals aren't spades there 2 tiny pins

stewardc · « **Reply #4 on:** July 20, 2007, 12:13:18 pm »

Ahhh yes. The spades are for the bulb. :oops:

Author Topic: VDO non powered Pyrometer connector (Read 2321 times)

stewardc

stewardc