Author Topic: where to get oversized TD pistons? (Read 3511 times)

the4ork · « **on:** June 16, 2007, 03:10:02 am »

where can i get a set of oversized TD pistons, .5-1mm oversized? new

and how much do they typically run, on ebay they are 300-400$

subsonic · « **Reply #1 on:** June 16, 2007, 07:13:50 am »

Look up Myke here on the forum. He was selling them for 300.00

Fisher · « **Reply #2 on:** June 16, 2007, 12:43:04 pm »

autohausaz.com

Kudagra · « **Reply #3 on:** June 16, 2007, 12:50:38 pm »

Quote from: "Fisher"

autohausaz.com

They never have the oversize (1.0mm) that I needed.

CoolAirVw · « **Reply #4 on:** June 16, 2007, 03:02:42 pm »

I got good service from myke_w.

PM him.

Richard

the4ork · « **Reply #5 on:** June 16, 2007, 04:32:51 pm »

i was going to take the engine to a shop locally that has donw alot of vw diesel engines, im hoping they can get me a good price on a set, if not i'll hit up mike_w... doing a full rebuild + aba oil aquirters

burn_your_money · « **Reply #6 on:** June 16, 2007, 10:20:15 pm »

What is the advantage of ABA squirters?

rallydiesel · « **Reply #7 on:** June 16, 2007, 10:47:53 pm »

Anyone know if the piston set includes rings?

CoolAirVw · « **Reply #8 on:** June 16, 2007, 10:58:44 pm »

Quote

autohausaz.com

note: they show out of stock on website (special order only)

kolbenschmidt pistons are oem quality and include rings.

I took them to my machine shop and they tried to demonstrate that my engine needed balance by showing me how "out of balance" even the new pistons were on this $3000 scale that measures to 1/10th of a gram.

He started off by saying they should all be within 1 gram.
Right out of the box my new pistons were...
519.9 grams
520.4
519.7
520.6

Needless to say they didn't need balance. Also the ring gaps on top and bottom were perfect. The middle ring needed about 1-2 thousandths "adjustment" to be in spec according to bentley (note that bore size also affects this).

Point is.... buy quality Kolbenschmidt pistons cuz they're good.
Richard

If ya aint got the money for quality the first time how ya gonna afford it the 2nd time?

A wise man once said, "Everybody loves content with a Pic!" (oh wait that was me!)

okron1k · « **Reply #9 on:** June 18, 2007, 11:17:32 am »

what's the link for the kolbenschmidt pistons

subsonic · « **Reply #10 on:** June 18, 2007, 05:10:10 pm »

Ask and ye shall receive:

From the 2007catalog(go to pistons, 919-920 #24, #23 is for ME info):

http://www.msi-motor-service.com/ks/en/kataloge/kataloge_en.asp

This is for the 1.6TD piston set
76.51=#90 732 600
77.01=#90 732 610
77.51=#90 732 620
Also for engine codes:
1G
1V
ACL
CY
DV
JR
JX
RA
SB
Hope this cuts down your searching time