Author Topic: FS: alh parts, 11mm pump, vnt15  (Read 4399 times)

June 12, 2007, 07:31:49 pm

nkb

  • Junior

  • Offline
  • **

  • 154
FS: alh parts, 11mm pump, vnt15
« on: June 12, 2007, 07:31:49 pm »
ive got a 11mm pump i was going to use for my m-tdi project but need money for a better turbo. its off a 02 or 03 i will have to check again only has 177km on it and the motor ran perfect before i pulled it from the car.
 ive got 3 10mm too but ive got those apart at the moment. the turbo is like new also. hell i might even part with the motor too if the right price comes up!
2004 Jetta TDI
1997 GMC Suburban 6.5td
2002 S-10 AWD V8 turbo, Sy-clone
1986 S-10 LT1

Reply #1June 12, 2007, 08:01:47 pm

subsonic

  • Veteran

  • Offline
  • ***

  • 1836
FS: alh parts, 11mm pump, vnt15
« Reply #1 on: June 12, 2007, 08:01:47 pm »
What ya asking for the vnt?
2009 Jetta TDI Loyal edition, 6-spd. 16V 2.0CR


1985 VW Golf 5-spd, 4-door, 1.6NA  Bought from orig. owner in Savannah with 42,000 miles.
"Making the jump NA to TD" slow but sure.

1980 VW Rabbit LS 5-spd, 4-door 1.6NA almost 450,000miles  RIP

Reply #2June 14, 2007, 05:51:10 pm

nkb

  • Junior

  • Offline
  • **

  • 154
FS: alh parts, 11mm pump, vnt15
« Reply #2 on: June 14, 2007, 05:51:10 pm »
250 shipped to maine
2004 Jetta TDI
1997 GMC Suburban 6.5td
2002 S-10 AWD V8 turbo, Sy-clone
1986 S-10 LT1

Reply #3June 19, 2007, 07:57:48 pm

dirtytom

  • User+

  • Offline
  • *

  • 46
FS: alh parts, 11mm pump, vnt15
« Reply #3 on: June 19, 2007, 07:57:48 pm »
I could use a 10mm pump head and steal fuel lines to the injectors. Would you sell thoses items and how much if mailed to jacksonville florida
It is sad when you smell smoke while driving and you think" some poor SOB must have an engine fire. Oh well sucks to be them" only to notice smoke billowing out of your car and be over heard saying "not again".

Reply #4June 20, 2007, 10:14:55 pm

dubCanuck1

  • Veteran

  • Offline
  • ***

  • 279
    • http://www.canadubs.com
FS: alh parts, 11mm pump, vnt15
« Reply #4 on: June 20, 2007, 10:14:55 pm »
How much are you looking for the 11mm pump?