FS: 1.6TD camshafts, intake and exhaust manifolds - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• FS: 1.6TD camshafts, intake and exhaust manifolds by Black Smokin' Diesel on 27 May, 2007 15:23
• Up for sale are two 1.6 TD camshafts, intake and exhaust manifolds.
  
  Cams are in good condition, the slot for the locking plate is intact on both. Definitely usable. IIRC they are the same as the 1.6NA and 1.9TD cam.
  
  Intakes are dirty as hell and will need a good cleaning. No heatshields provided. Round port holes.
  
  The exhaust manifolds are pretty clean but rusty. They have the trapezoidal turbo flange (T3 and K24). The bolts holding the downpipe braket broke off. Bracket not provided either.
  
  Pictures available on request.
  
  Asking 45$ CAD plus shipping for one camshaft
  
  Asking 30$ CAD shipped for one intake manifold.
  
  Asking 30$ CAD plus shipping for one exhaust manifold.
  
  The reason the intakes have shipping included is that they are very light compared to the exhaust manifolds and camshafts.
  
  I also have a bunch of misc 1.6 engine parts such as non-ac alt bracket, pump bracket, and some other stuff. IM me for those.
  
  Paypal Only.
• #1 by boostin on 27 May, 2007 17:58
• will the round hole intake fit the 1.5 NA head? ( seems like I read this somewhere ) I have not yet removed mine..
  
  IM sent
• #2 by burn_your_money on 27 May, 2007 22:53
• Yes it will bolt up but these are turbo diesel parts... your NA stuff is better (less cylinder bias)... unless you are building something cool
• #3 by boostin on 28 May, 2007 16:03
• Yes it will bolt up but these are turbo diesel parts... your NA stuff is better (less cylinder bias)... unless you are building something cool [/quote]
  Thanks for your input. what would be a good turbo/ manifold combo, if I decide to whack the runners off a 1.6l NA intake, and weld on a honkin plenum, for example....
• #4 by Black Smokin' Diesel on 28 May, 2007 17:05
• Quote from: "boostin"

  Quote

  Yes it will bolt up but these are turbo diesel parts... your NA stuff is better (less cylinder bias)... unless you are building something cool

  
  Thanks for your input. what would be a good turbo/ manifold combo, if I decide to whack the runners off a 1.6l NA intake, and weld on a honkin plenum, for example....

  
  
  The turbo exhaust manifold itself is pretty good, it's the slim intake manifold that's not really good.[/quote]
• #5 by Black Smokin' Diesel on 04 Jun, 2007 15:33
• Bump still for sale, I also have a non-AC alternator bracket with the non-AC alt pulley for 40$ CAD plus shipping.
• #6 by Kudagra on 15 Jun, 2007 19:54
• Are the camshafts Hyd or Mechanical?
  
  BTW paypal sent for the other stuff.
• #7 by rabbitman on 02 Jun, 2008 17:10
• Do you still have a turbo intake manifold?
• #8 by Black Smokin' Diesel on 02 Jun, 2008 21:45
• Quote from: "rabbitman"

  Do you still have a turbo intake manifold?

  
  
  Nope, nothing left
• #9 by burn_your_money on 02 Jun, 2008 21:52
• In that case, I might have one. I'll need to look in the shed
• #10 by rabbitman on 04 Jun, 2008 19:31
• Hey, Burn your money, did you say you might have a TD intake manifold?