Author Topic: WTB AAZ std bore piston or two, good used ok (Read 4151 times)

bigblockchev · « **on:** May 08, 2007, 08:49:37 pm »

I have one really bad piston and another that would be nice to replace. Has anyone done a rebore & have their old slugs sitting gathering dust i could put them to use and a few bux in you pocket. Thanks all Dan

dirtydiesel · « **Reply #1 on:** May 12, 2007, 09:55:24 am »

i have all 4 pistons. good shape bored engine O\S don't need anymore

bigblockchev · « **Reply #2 on:** May 12, 2007, 11:24:05 pm »

I Pm'd you. I'm interested in the set My email is [email protected] thanks Dan Minchin

dirtydiesel · « **Reply #3 on:** May 13, 2007, 09:20:51 am »

will do Dan gimme a week ok
will email you

bigblockchev · « **Reply #4 on:** May 15, 2007, 10:46:15 pm »

I see that you are having your own scary times with oil pressure loss. I had my oil light come on last year but I ended up getting a new oil pump. Also had a bit of a discussion with a knowledgeable fellow about replacing worn intermediate shaft bearings , a known issue with high mileage engines which mine is. Good luck Dan

dirtydiesel · « **Reply #5 on:** May 24, 2007, 08:38:27 pm »

hey the oil pressure problem was a water pump bolt. It had backed out of the housing and jammed the inter shaft. i was very lucky.

Author Topic: WTB AAZ std bore piston or two, good used ok (Read 4151 times)

bigblockchev

WTB AAZ std bore piston or two, good used ok

dirtydiesel

WTB AAZ std bore piston or two, good used ok

bigblockchev

AAZ pistons

dirtydiesel

WTB AAZ std bore piston or two, good used ok

bigblockchev

Scary stuff oil pressure loss

dirtydiesel

WTB AAZ std bore piston or two, good used ok