Author Topic: FS lots of TD parts. MK1 and MK2 (Read 6103 times)

burn_your_money · « **on:** April 30, 2007, 09:08:03 pm »

Lots of parts, lots more to come

Hoses $5 a piece
http://img.photobucket.com/alb...0.jpg

Timing belt covers $10 a set
http://img.photobucket.com/alb...9.jpg

White mk2 Jetta body panels
http://img.photobucket.com/alb...8.jpg

Wheels tarantulas $50, other 13s $50 Cookie Cutters $80
http://img.photobucket.com/alb...7.jpg

Complete CE1 Diesel wiring harness, 1 cut wire (dome light) $75
http://img.photobucket.com/alb...6.jpg

TD air boxes MK2 and MK3 $35 with hoses
http://img.photobucket.com/alb...5.jpg

Diesel Flywheels $15
http://img.photobucket.com/alb...4.jpg

TD block, 76,48mm pistons, 400k kms, 300-350 PSI across the board $50 pickup or delivery to GTA extra
http://img.photobucket.com/alb...6.jpg
http://img.photobucket.com/alb...5.jpg

Td head, same as above $50 Questionable condition (see block pictures)
http://img.photobucket.com/alb...4.jpg
http://img.photobucket.com/alb...3.jpg
http://img.photobucket.com/alb...2.jpg

vwmike · « **Reply #1 on:** April 30, 2007, 11:18:02 pm »

How much for the shoes?

burn_your_money · « **Reply #2 on:** April 30, 2007, 11:20:56 pm »

Quote from: "vwmike"

How much for the shoes?

$25 + shipping. They probably have 4300 hours on them

Turbinepowered · « **Reply #3 on:** May 01, 2007, 08:50:45 am »

Those rims $50 a set or apiece? Just curious, not really looking for rims, but for the right price, you know...

What size turbo is that sitting in the middle of the pic?

burn_your_money · « **Reply #4 on:** May 01, 2007, 09:45:40 am »

$50 a set, there are 3 different sets

That turbo is a K24, I have a few of them and a T3 as well I think (still need to check)

Turbinepowered · « **Reply #5 on:** May 01, 2007, 09:51:44 am »

Quote from: "burn_your_money"

$50 a set, there are 3 different sets

That turbo is a K24, I have a few of them and a T3 as well I think (still need to check)

Daaamn, and here I payed almost three times that for a set of nice cookie cutters just a couple months ago. What can I say, I'm a cookie-cutter fan.

Out of curiousity again, what size are the tarantulas, rim-wise?

veeman · « **Reply #6 on:** May 01, 2007, 05:31:57 pm »

Hey there... is that a turbo oil line on the right? I need one for a 1.6TD (mk1 setup with Garrett turbo). Is that the right one?

Black Smokin' Diesel · « **Reply #7 on:** May 01, 2007, 05:46:40 pm »

Dude I need a k24 with a working wastegate and a good compressor wheel. I don't care about oil leaks and shaft play, I only need those two parts.

How much for one?

burn_your_money · « **Reply #8 on:** May 01, 2007, 11:21:37 pm »

tarantulas are 13". The cookie cutters are kind of beat up, lots of curbage.

That oil line is sold, I have one (from a mk1 with a garrett) that I will sell. Not sure when I will get around to removing it though

Working wastegate I can't gaurantee but the wheel looks good. $55 shipped sound good? I can have it in the mail tomorrow if you send the money tonight, otherwise it probably won't be mailed until early next week

Black Smokin' Diesel · « **Reply #9 on:** May 02, 2007, 12:23:54 am »

Quote from: "burn_your_money"

Working wastegate I can't gaurantee but the wheel looks good. $55 shipped sound good? I can have it in the mail tomorrow if you send the money tonight, otherwise it probably won't be mailed until early next week

Send me an IM with your payment info.

burn_your_money · « **Reply #10 on:** May 02, 2007, 10:17:10 am »

Quote from: "Black Smokin' Diesel"

Send me an IM with your payment info.

Sent

Black Smokin' Diesel · « **Reply #11 on:** May 02, 2007, 11:03:08 am »

Quote from: "burn_your_money"

Quote from: "Black Smokin' Diesel"

Send me an IM with your payment info.

Sent

Payment sent with shipping info (paypal). Thanks a lot.

Northern RD · « **Reply #12 on:** May 02, 2007, 01:04:33 pm »

I`m intrested in the CE1 wiring harness but are you sure it`s a CE1?
I noticed that the fan in the pic lacks the ballast resitor that is a part of the dual fan circuit for hi-temp situations. If you`re unsure I have a pic of a CE1 in situ showing this.
N.

burn_your_money · « **Reply #13 on:** May 03, 2007, 10:58:13 am »

That fan is unrelated to the wiring, it just happens to be sitting there. It would be great if you could send me the info on CE1 so that I can confirm it. It is from a 86 NA diesel Golf

norm53 · « **Reply #14 on:** May 03, 2007, 12:21:10 pm »

Any 15" sets of wheels to fit my 99 jetta tdi?