Author Topic: My new Speedo and Tacho (Read 4319 times)

GTD. · « **on:** April 19, 2007, 12:08:44 pm »

Just need matching Boost, Pyro, Fuel and Coolant temp guages now

SMOKEYDUB · « **Reply #1 on:** April 19, 2007, 03:29:26 pm »

those are cool but that poor little tach will be so over revved.

GTD. · « **Reply #2 on:** April 19, 2007, 03:46:21 pm »

with the limiter untouched mine wont rev past 3.5k :shock:

GTD. · « **Reply #3 on:** December 08, 2007, 12:59:22 pm »

Finally finished guage collecting for now... would prefer a better match on the air temp guage and ammeter.

I just need an 80mm hole saw, a 52mm hole saw, a pair of 80mm VDO spin locks, a k type thermocouple and cable, a 1/8" female npt barb and two or three din guage holders and just wire em up and fit warning lights from a mk3 dash to the mk2 dash.

con · « **Reply #4 on:** December 08, 2007, 02:37:52 pm »

Gonna have a nice dash when you're done. Hows the car coming along?