Author Topic: Pump Project  (Read 2427 times)

March 17, 2007, 07:25:21 pm

jasonsansfleece

  • Junior

  • Offline
  • **

  • 162
Pump Project
« on: March 17, 2007, 07:25:21 pm »
I want to build a pump for an eco motor project.

I have the original pump and a 88 jetta n/a pump with an ADA (read LDA) and a load dependent start of delivery device (LFB)

The ADA could be fitted to either pump.

I have a basic understanding of how the LFB works from the Bosch book but not the finer points.

Would the LFB be desirable in a pump that was set up to push fuel with ones foot down?

Which pump shall I reseal and modify?

I was hoping for 15lbs boost from a intercooled KKK14,

Guy

Reply #1March 19, 2007, 03:51:58 am

jasonsansfleece

  • Junior

  • Offline
  • **

  • 162
Pump Project
« Reply #1 on: March 19, 2007, 03:51:58 am »
So, no feed back on the LFB pump :?:

Reply #2March 27, 2007, 04:50:28 am

jannemann

  • Newbie

  • Offline
  • *

  • 10
Pump Project
« Reply #2 on: March 27, 2007, 04:50:28 am »
Hallo, I would advice a pump of a Bus (code JX), because there´s no need to modify the LDA. Or try  to use a  JX LDA at your pump.
Jan
sorry for my  english  :o)