FS: NOS Items MK1,MK2,MK3, Somthing for Everyone! - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• FS: NOS Items MK1,MK2,MK3, Somthing for Everyone! by VDub_Fun on 16 Mar, 2007 17:22
• FOR SALE
  
  The time has come for me to clear out some of my stock pile of NOS items. The Following are New Old Stock Items, Never been used. All prices are OBO. Pictures are available upon request.
  
  Contact: Via PM, Post Up here, or E-Mail: [email protected]
  
  I have listed the Part Numbers and a Brief Description of the Parts, then the Price
  
  6N0 905 104 2.0L ABA 1993-1999 Ignition Coil X7 $50.00each
  
  431 498 099 AX 1985-1990.5 MK2 Outter 90MM CV Kit $50.00
  
  357 615 115 B or C Front Break Pads $10.00
  
  000 000 000 MK3 93-99 Front and Rear Springs 4Pink 3Green $20.00
  
  034 903 017BV MK2 1985-1992 Alternator 90Amp VW Rebuild Wterm. Diesel $100.00
  
  068 903 017CV MK2 1985-1992 Alternator 90Amp VW Rebuild Wterm. Diesel $100.00
  
  036 903 017V MK1Alternator 55Amp Damaged volt reg. $50.00
  
  055 903 023EV MK1Alternator 55Amp Motorola with pully $85.00
  
  027 911 023V MK2 1985-1992 Automatic Starter $75.00
  
  02A 911 023H MK3 1993-1999 VR6, Corrado 1993-1994
  VR6,Passat 2.0L, VR6 VW Reman Starter $145.00
  
  1H0 422 803 MK3 1993-199 RW Racks TRW Tie Rods Left and Right with Boots $40.00
  
  056 121 113D ALL To 1999 Thermostat 87 Degree With Cover $5.00
  
  037 121 031C MK3 1993-1999 A/C Delet Pully $20.00
  
  044 103 609D MK3 Tdi AHU 1Z Oil Pan Gasket $2.00
• #1 by RabbitGTDguy on 16 Mar, 2007 18:16
• might be interested in an 02a slave to have around for spare at that price and possibly the a/c delete pulley (assuming this is the "serp" replacement pulley for the h20 pump), no harm in having it around for the future TDI swap into the b3 wagon
  
  
  Joe
• #2 by VDub_Fun on 16 Mar, 2007 20:32
• Let me know  
• #3 by RabbitGTDguy on 17 Mar, 2007 07:48
• Question is...how much would shipping be from there to 14905, NY for those items
  
  Joe
• #4 by VDub_Fun on 19 Mar, 2007 07:35
• Sorry for the late Reply
  Shipping would be 18.00 for the A/C Delete Pully and the Slave cyclender
• #5 by addautomotive on 02 Apr, 2007 05:55
• Quote from: "VDub_Fun"

  
  
  037 121 031C MK3 1993-1999 A/C Delet Pully $20.00
  
  

  
  
  I'm assuming it's the water pump pulley, correct? Can you do me a HUGE favor and measure that pulley? The one I have is 11.5cm and it is too big. If this one is right, I'd buy it if you could send it priority courrier tonight!
• #6 by VDub_Fun on 02 Apr, 2007 07:08
• I sent you a PM
  
  It is the same size as yours
• #7 by burn_your_money on 02 Apr, 2007 21:14
• 000 000 000 MK3 93-99 Front and Rear Springs 4Pink 3Green $20.00
  
  what does the 4pink 3green mean? I need a complete set for my diesel. How much would it be shipped to p1b 3v9?
• #8 by VDub_Fun on 03 Apr, 2007 15:07
• I have no idea on what shipping would cost, it would be a bit. The colors are the color codes for the springs. I will ship them if you want them shipped but its going to be expensive, your more than welcome to come pick them up here.
• #9 by burn_your_money on 05 Apr, 2007 09:12
• I can't see shipping being all that much... do you know if those springs will work fine in a 95 TD golf with a 1.6TD in it?
  
  If so let me know the total price and we can go from there.
• #10 by VDub_Fun on 05 Apr, 2007 14:00
• Hello
  
  I have no idea if the springs would work for you or not, as I have forgotten witch car I purchased them for and can not find the look up chart for the color codes.
• #11 by burn_your_money on 05 Apr, 2007 14:35
• How much shipped? Worst case is they would be too stiff right?
• #12 by VDub_Fun on 05 Apr, 2007 15:26
• Hello
  
  Worst case they would not fit, as I am 80% sure that they are for a MK3/MK2. Total With Shipping would be $40.00
  
  I can get you a new set of springs Front and Rear for a MK3 Turbo Diesel AAZ For $120.00+PST and $20.00 Shipping. I can also get you any other OEM springs, send me an PM or Post here for what car and engine combo and I will get back to you with a price.
  
  Thanks
• #13 by burn_your_money on 05 Apr, 2007 15:57
• 
  
  Apparently they are for a VR6 so I don't think they will work
  
  I'll get back to you on a new set. Ideally I only need one front spring but I know that is a bad idea
• #14 by VDub_Fun on 05 Apr, 2007 16:48
• Thanks For the Info!
  
  Some how I missed that when I looked them!