AAZ engine with K24 turbo - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• AAZ engine with K24 turbo by Jimmy Diesel Junior on 07 Mar, 2007 12:18
• Hi all. I've been reading the search forum again and it leads me to another question  When i fit the k24 to the aaz, can i swap over the 1.6td sump onto the aaz and block the oil return at the rear of the block or will the rear engine mounting be in the way of the eturn oil pipe  :shock:
• #1 by mdonau on 07 Mar, 2007 13:20
• simply: yes
  
  but the return line may be a little too short.
  
  greets, michael
• #2 by Jimmy Diesel Junior on 08 Mar, 2007 10:29
• Ok thanks. So i need to extend the return line a little but there is no issue with the rear engine mounting fouling the return line???
• #3 by andy2 on 09 Mar, 2007 19:40
• I'm not sure about using the 1.6 oil pan on the AAZ.I would have to guess that the AAZ motor mount would not be made for the 1.6 oil line to go between it and the block.I just use the 1.9 return into the block.You will need the upper half of the 1.6 return line and the bottom half of the 1.9 return to make it work without too much hastle.
• #4 by Jimmy Diesel Junior on 10 Mar, 2007 12:45
• Thanks for the reply Andy. Does anyone else want to add their thoughts on the matter :?: