k24 on aaz manifold - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• k24 on aaz manifold by Jimmy Diesel Junior on 05 Mar, 2007 10:45
• Hi guys. Have been trawling the search forum for an answer to the following question. I want to fit a k24 to my aaz. I believe that i need to change the oil lines and sump which is not a problem but will the k24 from the mk2 fit the aaz manifold or do i use the k24 manifold??? Any other info regarding the swap appreciated also. Thanks guys
• #1 by lord_verminaard on 05 Mar, 2007 13:08
• From what I have gathered, the AAZ manifold will not accept the k24.  I think the AAZ uses a 3-bolt triangle pattern to bolt to the manifold, the k24 and Garrett use a trapeziodal 4-bolt pattern.
  
  Brendan
• #2 by g-spec on 05 Mar, 2007 13:14
• What kind of turbo do you have on the AAZ???
  I was able to use a AAZ manifold for the T3 turbo which uses a trapezoidal flange!!! If your car had a KO3 then you wont be able to...but besides that you should without a problem!!!
  You will also have to grind off a piece of the intake manifold!!!
  cheers, Michal