S-PAutomotive.com

Author Topic: Headgasket Sizes / Part Numbers  (Read 23334 times)

February 13, 2007, 01:54:24 pm

malone

  • Administrator
  • Veteran

  • Offline
  • ****

  • 1156
    • Malone Tuning Ltd.
Headgasket Sizes / Part Numbers
« on: February 13, 2007, 01:54:24 pm »
Thanks go to fspGTD for retrieving this information:

1.6L

1980 Rabbit 1.6D:
* 3-notch (1.4mm): 068 103 383 FB
* 4-notch (1.5mm): 068 103 383 FC
* 5-notch (1.6mm): 068 103 383 FD

1981 Rabbit 1.6lD 11mm headbolt:
* 1-notch (1.4mm): 068 103 383 ES
* 2-notch (1.5mm) 068 103 383 ET
* 3-notch (1.6mm): 068 103 383 FA

81-84 Rabbit/Jetta 1.6 solid lifter 12mm headbolt:
* 1-notch (1.4mm): 068 103 383 FL
* 2-notch (1.53mm) 068 103 383 FM
* 3 notch (1.61mm): 058 103 383 FN

1986 Jetta 1.6 hydraulic:
* 1-hole (1.53mm): 068 103 383 EH
* 2-hole (1.57mm): 068 103 383 EJ
* 3-hole (1.61mm): 068 103 383 EK

The 11mm headbolt Vanagon CS engine code did get a unique head gasket:
1980-85 Vanagon 1.6 11mm headbolt (up to CS 000 338):
* 1-notch (1.4mm): 068 103 383 AT
* 2-notch (1.5mm): 068 103 383 ET
* 3-notch (1.6mm): 068 103 383 FA

Engine code JX:
* 1-hole (1.53mm): 068 103 383 FE
* 2-hole (1.57mm): 068 103 383 FF
* 3-hole (1.61mm): 068 103 383 FG

1.9L

1 hole (1.53mm) 028 103 383BH
2 hole (1.57mm) 028 103 383BJ
3 hole (1.61mm) 028 103 383BK

I don't have ETKA handy at the moment.. If anyone has more headgasket information to share, please post here or send me a PM.
« Last Edit: February 09, 2022, 06:04:11 pm by libbydiesel »


http://www.tunezilla.com
93 Eurovan AHU TDI
96 Golf 1.9L ASV TDI - I bought it back!
97 Golf Variant Syncro 1.9L 1Z TDI - sold and missed
11 Golf 2.0L CJAA TDI DSG - Stage 4
14 Golf Wagon 2.0L CJAA TDI DSG - Sold
17 BMW 328d wagon - Sold
09 BMW 335d 3.0L

Reply #1January 03, 2008, 07:06:51 pm

dieselsnowmobile

  • Junior

  • Offline
  • **

  • 103
Headgasket Sizes / Part Numbers
« Reply #1 on: January 03, 2008, 07:06:51 pm »
Engine codes with them?
'89 1.6L NA Diesel Jetta (469,100 mi) w/ Rabbit Engine (242,500 mi)

Reply #2January 05, 2008, 02:24:22 am

burn_your_money

  • Global Moderator
  • Veteran

  • Offline
  • ****

  • 9005
  • Personal Text
    Bright, On
Headgasket Sizes / Part Numbers
« Reply #2 on: January 05, 2008, 02:24:22 am »
Quote from: "prothe"
What's the difference between the 80 and 81 Rabbit?


It looks like VW just changed their rating system (number of notches) because the thickness stayed the same, only the suffix on the part number changed

Looking at the part numbers they all end in 383 except for 3 of them, where it is 838, is that a typo?
Tyler

Reply #3January 14, 2008, 05:20:07 pm

RabbitJockey

  • Veteran

  • Offline
  • ***

  • 5063
  • Personal Text
    America, DUCK YEAH!!!
Headgasket Sizes / Part Numbers
« Reply #3 on: January 14, 2008, 05:20:07 pm »
what about tdi?  i've been wondering if i could just use a tdi head gasket on my 1.6
01 Jetta TDI 100% stock daily
81 Rabbit:TDI-M ported head, Frank06 cam, PD intake, hybrid T3 turbo, Renault intercooler, Syl20 11mm pump, light weight fw, and yellow California Clutch clutch kit

Reply #4January 14, 2008, 05:43:18 pm

jimfoo

  • Veteran

  • Offline
  • ***

  • 2110
    • http://www.66rover.com
Headgasket Sizes / Part Numbers
« Reply #4 on: January 14, 2008, 05:43:18 pm »
Well if the TDI head, at least up to AHU, fits an AAZ, and an AAZ gasket fits a 1.6, then a TDI gasket fits a 1.6 as well.
Jim
1966 Land-Rover 88" with 1.9 1Z which has been transformed to an M-TDI
TFO35 mechanically controlled VNT, IC , and 2.5" exhaust.
Driven daily

Reply #5January 31, 2008, 10:05:14 pm

Vanagoner

  • Junior

  • Offline
  • **

  • 219
Headgasket Sizes / Part Numbers
« Reply #5 on: January 31, 2008, 10:05:14 pm »
Are all of the CS blocks tapped for 11mm headbolts? argh. I assumed it was a 12mm engine.  Why would they do that- Vanagon engines are chronically overstressed.
Sage
'82  Vanagon Westy, the mighty N/A

Reply #6November 13, 2008, 01:51:04 pm

53 willys

  • Guest
Headgasket Sizes / Part Numbers
« Reply #6 on: November 13, 2008, 01:51:04 pm »
Quote from: "jimfoo"
Well if the TDI head, at least up to AHU, fits an AAZ, and an AAZ gasket fits a 1.6, then a TDI gasket fits a 1.6 as well.

yeah  but what about the AHU gasket not having prechamber reinforcements??? that's the only difference I can see between the two engines....

Reply #7November 15, 2008, 11:17:50 am

Reply #8February 06, 2009, 07:50:19 am

myke_w

  • Veteran

  • Offline
  • ***

  • 1099
Headgasket Sizes / Part Numbers
« Reply #8 on: February 06, 2009, 07:50:19 am »
just to add some redundancy (grabbed from brick's website)

1 notch - 1.53mm thick to suit piston protrusion of .66mm to .86mm
2 notch - 1.57mm thick to suit piston protrusion of .87mm to .92mm
3 notch - 1.61mm thick to suit piston protrusion of .93mm to 1.02mm
Contact me for hard to find for idi and tdi parts


Reply #9August 14, 2018, 07:28:40 pm

libbydiesel

  • Global Moderator
  • Veteran

  • Offline
  • *****

  • 3416
Re: Headgasket Sizes / Part Numbers
« Reply #9 on: August 14, 2018, 07:28:40 pm »
Here are the 1.5L sizes:
piston protrusion     gasket thickness     notches     part number     
0.43-0.63(.017-.025)     1.30(.051)     2     068103383     
0.63-0.82(.025-.032)     1.40(.055)     3     068103383C     
0.82-0.92(.032-.036)     1.50(.059)     4     068103383G     
0.92-1.02(.036-.040)     1.60(.063)     5     068103383H     

 

S-PAutomotive.com