Author Topic: no throttle (Read 2983 times)

madmatt · « **on:** February 01, 2007, 04:32:56 pm »

my 1y motor in my t3 will not rev .i removed the top of the pump to find rubber swarf in the return and in the pump but not in the main filter any ideas where this came from?

QuickTD · « **Reply #1 on:** February 01, 2007, 06:45:27 pm »

The governor drive gear has rubber blocks between it and the drive shaft to dampen torsional vibration. My guess is that these are disintegrating.

jtanguay · « **Reply #2 on:** February 01, 2007, 08:28:10 pm »

ultra low sulphur diesel strikes again??? :cry:

burn_your_money · « **Reply #3 on:** February 01, 2007, 08:35:49 pm »

Quote from: "jtanguay"

ultra low sulphur diesel strikes again??? :cry:

Not in the UK....

jtanguay · « **Reply #4 on:** February 01, 2007, 09:44:22 pm »

what is the standard in Europe? i thought they have super clean diesel over there... maybe he was running BD?

madmatt · « **Reply #5 on:** February 02, 2007, 02:34:07 pm »

cheers guys im going to pull the pump tomorrow and swap it with another one.
could i swap the shaft with a 16 one?

GTD. · « **Reply #6 on:** February 02, 2007, 04:18:34 pm »

Quote from: burn_your_money

Quote from: jtanguay
ultra low sulphur diesel strikes again??? :cry:

Not in the UK....

ULSD is available in the UK, a lot of supermarkets are starting to sell it at the pump aka City for instance the local oil terminal the supermarkets use only refines, stores and sells ULSD now (I know this as I work at the Logistics company that delivers the fuel to the supermarkets)

http://www.ukpia.com/faqs/new_fuelssulphurfree_petrol_diesel_lpg.aspx

QuickTD · « **Reply #7 on:** February 02, 2007, 06:01:13 pm »

Quote from: "madmatt"

cheers guys im going to pull the pump tomorrow and swap it with another one.
could i swap the shaft with a 16 one?

No need to swap the shaft, the rubber blocks for the damper are included in an injection pump gasket kit. Complete pump disassembly will be required to install them. If you aren't familiar with the inner workings of the pump it's probably best just to swap it for a good one.

madmatt · « **Reply #8 on:** February 03, 2007, 03:47:54 pm »

cool not done built one before but its all a learning curve.