Author Topic: turbo question (Read 2815 times)

entuzijast · « **on:** December 28, 2006, 03:36:48 pm »

Ok, don't attack me, I know this subject is chewed like a hundred times, and I did a search, but I found different opinions,

but to make it short,

120 hp, how much bar do I need?

and

for that purpose, including that the car will be a daily driver, k14 or k24?

EDIT: I forgot to mention it is 1.6l engine

andy2 · « **Reply #1 on:** December 28, 2006, 03:45:57 pm »

The T3 will handle 120 hp at 22-24 psi(boost) better than any other bolt on turbo even the k24.Yes there will be more lag when compared to the ko3,k14 or t2 but If you want an efficent 120 hp from a 1.6/1.9 then it is the turbo of choice

andy2 · « **Reply #2 on:** December 28, 2006, 03:48:52 pm »

So 22-24 psi is somthing like 1.6-1.7 bar I think??

entuzijast · « **Reply #3 on:** December 28, 2006, 03:52:27 pm »

22 psi is 1.52 bar, 24 psi is 1.65 bar...

RabbitJockey · « **Reply #4 on:** December 28, 2006, 04:04:49 pm »

24 feels good on my jetta, i dunno about 120 hp though

bert · « **Reply #5 on:** December 29, 2006, 01:41:11 am »

Hi,i used the T3 and its good fun :twisted: on a AAZ 1.9
Bert

Author Topic: turbo question (Read 2815 times)

andy2

andy2