-
What oil do you use?
by
wolfsburgnut
on 08 Dec, 2006 20:14
-
I was using Valvoline oil (15W-40 CI-4 rated I think) up until a couple of months ago until my local altrom dealer convinced me to try Liqui-Moly High Tech Touring 15W-40. Its got the VW rating 502 I think, and I immediately noticed a huge difference in startup oil pressure (for the better) and oil consumption (about a liter every 6000 kms). However I noticed the API rating on it is only for CF!!! What the heck? I got some Liqui-Moly MoS2 10w40 semi synthetic for my car today, and again noticed it was only rated for CF.
I was wondering what kinds of oil other people use in their cars and if anybody has experience with the Liqui-Moly. I highly recommend it, even though its 26 bucks for 5 L of the High Tech and 36 bucks for 5L of the MoS2! :shock:
Peter
-
#1
by
jtanguay
on 09 Dec, 2006 05:34
-
isn't CF rated for turbo diesels???
the original rating for 1.6TD's was CD wasn't it?
-
#2
by
SMOKEYDUB
on 09 Dec, 2006 08:46
-
i never had any problems with that oil. we even use it at work
-
#3
by
g-spec
on 09 Dec, 2006 10:19
-
I use liqui moly on my corrado...havent got the diesel running yet but will be using it aswell....i like the oil....
first when i changed to it in the corrado i noticed it ran smoother and quieter!! it could have only been the new oil....but i have had no problems with it!!!!
-
#4
by
RabbitJockey
on 09 Dec, 2006 12:36
-
5w 40 shell rotella t full synthetic
-
#5
by
Black Smokin' Diesel
on 09 Dec, 2006 14:15
-
Tech2000 full synthetic 10w30 (wal-mart oil). 20$ for 4.4L. Very happy with cold starts so far
-
#6
by
sethyboy85
on 09 Dec, 2006 18:06
-
I am trying a blend this go around, 0w-40 Mobil 1 and Walmart 15w-40 about a 50/50... seems fine
-
#7
by
burn_your_money
on 09 Dec, 2006 19:24
-
5w 40 shell rotella t full synthetic
Pretty much what I run, 0W40 shell rotella T SB full synthetic. Great stuff, no complaints so far
-
#8
by
ricosuave
on 09 Dec, 2006 23:03
-
ufa polar plus 0w30 (rebranded esso xd3 synthetic) for ~22 a 5L jug
-
#9
by
jimbrown618
on 10 Dec, 2006 05:43
-
5w 40 shell rotella t full synthetic
Pretty much what I run, 0W40 shell rotella T SB full synthetic. Great stuff, no complaints so far
Same here....runs great
-
#10
by
RabbitJockey
on 10 Dec, 2006 06:22
-
i notice a difference in how it runs with the sythetic seems looser, the turbo seems to like it too
-
#11
by
anarchyx34
on 10 Dec, 2006 06:35
-
I was using Rotella 15w-40 for a while, but I noticed my oil consumption was pretty bad (1 qt 500 miles approx). I tried Delo 400 15w-40 and now it's a lot better, down to 1/2 qt every 1200 miles. Cold starts seem to be ok.
-
#12
by
jimfoo
on 10 Dec, 2006 07:50
-
i notice a difference in how it runs with the sythetic seems looser, the turbo seems to like it too
I run the Rotella synthetic also. I know synthetic is better for the turbo
because synthetic takes heat a lot better, and is less likely to coke up. I
used to run it in my circle track car when I raced. Had one hot day where my
water temp was a continuous 260 or above, as the gauge only went that
high. We were sure the cylinders and pistons were going to be scored, but
they only had polished marks on them. That's when I lost all doubt that
synthetic was way better.
-
#13
by
Staley
on 10 Dec, 2006 08:29
-
I use Amsoil Series 3000 Synthetic 5W-30 Heavy-Duty Diesel Oil (HDD)
Here are the ratings
• API CI-4+, CF, CF-2, SL • ACEA A3/B3, E2, E3, E5 • Global DHD-1 • JASO DH-1 • Mack EO-N Premium Plus ’03 • DDC Power Guard 93K214 • Caterpillar ECF-1 • Cummins CES 20071, 20072, 20076, 20077, 20078 • Volvo VDS-2, VDS-3 • MB 228.1, 228.3, 229.1 • MAN 3275 • MTU Type 1 • MIL-PRF-2104G
-
#14
by
Dennis Froelich
on 10 Dec, 2006 08:43
-
I did use Delo 400 15w40, but went to Rotella T 15w40. I'm hesitant to use synthetic oil since it has had dino oil in it forever.
Any responses about me hesitant about changing over to synthetic appreciated.