I have searched and can't find any posts on the size of the woodruff key that keeps the injection pump pulley aligned. It's the only part that I have misplaced. Where I live, only specialty shops carry metric sizes. I'm thinking that it's 3mm wide because the 3/32" is too thin and the 1/8" is too big. Thanks for your help. I'm ready to get my Giles pump up and running.
Mark
I measured one with my el cheapo plastic caliper and got .12 inches which converts to 3.04800 millimeters
.
i went to vw owasco... and on etka the woodruff key was around a buck or two...? cheeeeaap!