« previous next »
Pages: [1]

Author Topic: Injection pump pulley key  (Read 2181 times)

December 03, 2006, 01:42:03 pm

91 ECO

  • Guest
Injection pump pulley key
« on: December 03, 2006, 01:42:03 pm »
I have searched and can't find any posts on the size of the woodruff key that keeps the injection pump pulley aligned.  It's the only part that I have misplaced.  Where I live, only specialty shops carry metric sizes.  I'm thinking that it's 3mm wide because the 3/32" is too thin and the 1/8" is too big.  Thanks for your help.  I'm ready to get my Giles pump up and running.

Mark
Logged
Reply #1December 03, 2006, 10:20:50 pm

LeeG

  • Veteran
  • Offline
  • ***
  • 401
Injection pump pulley key
« Reply #1 on: December 03, 2006, 10:20:50 pm »
I measured one with my el cheapo plastic caliper and got .12 inches which converts to  3.04800 millimeters
    .
Logged
'97 Passat TDI
Reply #2December 06, 2006, 05:43:49 am

jtanguay

  • Veteran
  • Offline
  • ***
  • 6879
Injection pump pulley key
« Reply #2 on: December 06, 2006, 05:43:49 am »
i went to vw owasco... and on etka the woodruff key was around a buck or two...?  cheeeeaap!
Logged


This is how we deal with porn spammers! You've been warned.
Pages: [1]
« previous next »