Hydraulic block, Good condition NA

[sethyboy85]

I have a spare NA 86+ block that I just cleaned up, took head off cleaned block up (some dirt had gotten in it so I wanted to remove it)

Short block with good bearings all around, oil pump, oil pan, dipstick and intermediate shaft (no bearings)

Should have good compression as it has at most 50k walls look good hone marks still visible no scratches, alittle carbon buildup in the last 1/4" of bore most was coming off with Kero and a gentle rag.

The story behind it is a new head was put on (Going to be selling in future maybe) and the TB broke at idle, there are NO impact/imprints on the pistons there was barely anything visible in the carbon on the pistons either I had to really look. The cam was taking out the head appears fine so I believe there to be no damage.

I would use the block but I have 2 honed short blocks arleady one TD and one NA with all new bearings I don't really need a 3rd

Not looking to ship this small ton but I can, however I am willing to drive (mapquest 17938 to your location)

Asking $500

I would also accept xbox 360,psp or other stuff + cash. Hit me with a PM you never know what I might take for this block.