Author Topic: plunger question (Read 3049 times)

Benjamin · « **on:** October 20, 2006, 03:26:44 pm »

just a quick question wich i couldnt find in the search, can i use a left rotating plunger for a right rotating pump? (only the plunger, not the camplate ...)

Greetz, Benjamin

Tintin · « **Reply #1 on:** October 22, 2006, 10:30:59 am »

No, the hole distributor compare to groove at the end of plunger is laid out has the reverse, the plunger ''R'' and the plunger ''L'' to It mirror one of the other.

QuickTD · « **Reply #2 on:** October 22, 2006, 10:24:04 pm »

The keyway that indexes the plunger to the camplate is indexed differently in relation to the distributer slot on a left hand rotation plunger/head, this is what Tintin is referring to.

Tintin · « **Reply #3 on:** October 23, 2006, 03:47:56 pm »

I took a photo on an old seized 12mm (''R'' rotation)

Look at the delivery port location alignment compare to the filling groove at the top of plunger.

And look at the filling port on the sleeve of the plunger.