-
#15
by
scopefrfd
on 27 Sep, 2006 22:20
-
I could use them....any heads or exhaust valves?
-
#16
by
Justin
on 27 Sep, 2006 22:39
-
addautomotive,
I want the valve cover if its for the 1.9L TDI
if it is then how much shipped to zip code 48811
-
#17
by
addautomotive
on 27 Sep, 2006 22:46
-
the 911 heads went to a guy in NC a few months ago.
Justin, looks like the valve cover is spoken for.
Oil cooler & sandwich plate:
-
#18
by
Justin
on 27 Sep, 2006 22:50
-
dont happen to have a AAZ head laying around or know of one do you?
-
#19
by
addautomotive
on 27 Sep, 2006 22:52
-
dont happen to have a AAZ head laying around or know of one do you?
Had one, but it was beat bad. Precups loose, valves bent. I should've kept it as a monument to the AAZ crank pulley
-
#20
by
VelocityConservation
on 27 Sep, 2006 23:03
-
Will that oil cooler and sandwich plate bolt on to a VW 1.6 TD?
VelocityConservation
-
#21
by
addautomotive
on 27 Sep, 2006 23:11
-
you betcha. I even have the tube that you screw into the filter flange. It's a bit long, but could be trimmed to fit whatever your setup is.
Bought it used on ebay for a project but I've never used it.
-
#22
by
Kudagra
on 27 Sep, 2006 23:22
-
How much shipped to 64015??
Ive been looking for one of those.
Only if VolocityConserv. dosent want it.
-
#23
by
Justin
on 27 Sep, 2006 23:30
-
what about the cam from that AAZ, was that any good and do you still have it?
-
#24
by
addautomotive
on 28 Sep, 2006 11:55
-
How much shipped to 64015??
Ive been looking for one of those.
Only if VolocityConserv. dosent want it.
I sent VolocityConserv a shipping quote, if he doesn't want it you have next dibs
what about the cam from that AAZ, was that any good and do you still have it?
Cam was FUBAR
-
#25
by
Kudagra
on 28 Sep, 2006 23:40
-
VelocityConservation
Kudagra you go ahead after the oil cooler I am going to be several more months before my engine swap gets underway.
VelocityConservation
Ok so what would the total be shipped to a 64015 business?
-
#26
by
addautomotive
on 29 Sep, 2006 08:52
-
VelocityConservation
Kudagra you go ahead after the oil cooler I am going to be several more months before my engine swap gets underway.
VelocityConservation
Ok so what would the total be shipped to a 64015 business?
~$18
-
#27
by
Kudagra
on 29 Sep, 2006 16:10
-
VelocityConservation
Kudagra you go ahead after the oil cooler I am going to be several more months before my engine swap gets underway.
VelocityConservation
Ok so what would the total be shipped to a 64015 business?
~$18
Done...how would you like to be paid?
-
#28
by
addautomotive
on 29 Sep, 2006 16:53
-
Paypal is my preference,
sending a PM
-
#29
by
addautomotive
on 02 Oct, 2006 09:58
-
Ongoing Garage Archeology:
-Glow plug relay kit. This came from an ACME Suzuki/vw diesel conversion kit. I'm going with a push-button switch s0 I don't need this relay kit. New is $85... I'd like $50 obo
http://www.acmeadapters.com/support_2.php-Adapter plate for VW i4 into vanagon or vw aircooled. I've never used it, but it's supposed to work with the flywheel from a Fox, Quantum or other longitudinal VW setup. Has mounts for "automatic" VW starter. $100
-1.9 AAZ k03 exhaust manifold