Author Topic: what size tool do you use for the head bolts ? (Read 3903 times)

jstaton · « **on:** September 12, 2006, 06:38:18 pm »

What size is the torques bit used for the 12mm head bolts in the head? I went to sears looking for the correct size, but the largest they had was 40 pt.

QuickTD · « **Reply #1 on:** September 12, 2006, 06:46:30 pm »

It isn't a torx bit, it's a 12mm XZN or "triple square". Lisle tools makes a cheap set of bits that fit in a 1/2" socket. Better quality bits are available from Mac, Snap-on and Hazet.

MacGyver · « **Reply #2 on:** September 12, 2006, 09:03:04 pm »

Triple square & other specialty VW tools also available from one of the TDI guys here:
http://shop.metalnerd.com/index.cgi?code=3&cat=5
Charles is a nice guy in person too

jstaton · « **Reply #3 on:** September 13, 2006, 06:44:06 am »

Thanks guys, I just ordered the Part MN0812 - 12 Point Driver Set and a 12 point crank socket