IP pump Id

[homerj1]

Can anyone id if this is a 1.6td pump or a AAZ pump?
Thanks 

[RabbitJockey]

this looks like an aaz pump because of the shape of the "snout" or nose. a part number would be the best way to tell

[homerj1]

There are no id #s on the pump except for
 " The numbers i can find are...
468 stamped into the housing beside the fuel inlet.
& CHJ 0631 printed on the delivery head"

The above is from the seller of the IP. Also the pump was rebuilt, not used & stored for the past 10 years, so I figure the insides might be a bit gummy?

[RabbitJockey]

Its possible that it's gummy, I bought one that had sat for about 4 years and the governor weights were stuck in it. it was an easy fix. I still have this pump if you'd like to buy it. I ran it until 2017 when the engine failed, then it sat in the car with fuel in it until about 1-2 years ago, since then it's been stored in my garage, it has a vanagon-style throttle lever on it

[homerj1]

PMed you RabbitJockey