1986 Jetta diesel rolling with parts. 1,000 obo - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• 1986 Jetta diesel rolling with parts. 1,000 obo by theman53 on 15 Apr, 2020 14:37
• This jetta is has a bad bottom end. I tried to sell it to a friend and before we got the title switched he somehow blew it up. Sounded like rod knock. I have no time for it anymore and want to sell. Will NOT come with intercooler, turbo, or IP. That is the bad.
  The good:
  I have rebuilt just about everything on this car. It has big CV's and ball joints, all poly mounts, strut tower brace, new struts and bearings, new calipers, drums and wheel cylinders, welded in new floor pans, 7" round grill, custom gauge panel, GTI steering wheel, 80% kit in trans, 7A trans, and more. It is a 1.6 MF block with an AAZ head, 210mm clutchnet PP and a Luk 210mm disk.
  
  I have an AAZ block, crank, pistons, and head that can go with it, I have an IP that I was converting to turbo IP, along with many other parts. Have an 02A trans, an 020 that the case cracked but has a bolt kit and was completely cryo treated. N/A manifolds. All would go with it.
  
  
  Located in North Central Ohio.
• #1 by theman53 on 15 Apr, 2020 14:39
• More pics
  
  also, less than 2,000 miles on Avid Asend 14" tires on Snow Flake rims.
• #2 by Dennis Froelich on 15 Apr, 2020 14:42
• Pics aren't showing up sir.
• #3 by theman53 on 15 Apr, 2020 15:03
• They do for me?
• #4 by Dennis Froelich on 15 Apr, 2020 16:07
• Well damn!!
  
  I wanted to see it. Oh well.
• #5 by ORCoaster on 15 Apr, 2020 22:36
• And the purpose of the cut blue zip ties is for what?
  
  And the lesson here is to get money, then title switched then keys.   Hope he was a good friend. 
  
  
• #6 by theman53 on 16 Apr, 2020 10:17
• don't know what you are talking about with the zip ties, please explain if you want a reply.
• #7 by theman53 on 16 Apr, 2020 10:19
• Quote from: Dennis Froelich on 15 Apr, 2020 16:07

  Well damn!!
  
  I wanted to see it. Oh well.
  

  PM me somewhere I could send the pics, as is I can see that others are looking at it from the views.
• #8 by Dennis Froelich on 16 Apr, 2020 15:24
• I did this morning. Should be a pm.
• #9 by ORCoaster on 16 Apr, 2020 21:10
• In the picture where you are looking into the car from the drivers side.  There are three blue cut zip ties going though the rubber gasket.  Or so it appears.  They are cut so I was wondering what was even secured up there at one time.
  
  I would like to see the gauge console as I just did mine on the caddy this week. 
• #10 by theman53 on 16 Apr, 2020 22:49
• The zip ties hold the gasket in place. Works as PO had them there.
  
  I will probably take the gauges but leave the gauge panel. I will search my build thread and see if I have a pic.
  
  I have the PM and will respond.
• #11 by theman53 on 18 Apr, 2020 10:05
• Throw me an offer.
• #12 by theman53 on 08 May, 2020 13:28
• would consider parting out
  
• #13 by Chuck1978 on 27 Sep, 2020 15:20
• Do you still have all this? I may be looking for a TD engine... my 1.6TD is about done for I fear. Central Ohio.
• #14 by theman53 on 28 Sep, 2020 16:01
• The engine is the bad in this. It is a roller and yes I still have it.
  
  That said, I am not on here much, so PM as it should send me an email and I will respond to you. I have some IDI blocks that I would part with.